http://www.iitd.ac.in

http://tes.iitd.ac.in


Prof. B.K. Behera has taken over as the Head of Textile Technology Department



Publications


 

Journal Publications :



Use of coir fibres for heat insulation, Journal of Natural Fibres, Journal of Natural Fibers,Volume 8, Issue 1, 2011 Taylor and Francais, London.

Abhijit Majumdar, Sibel Kaplan, Ozer Goktepe, Navel Selection of Rotor Spinning for Denim Fabric by Using Multi-Criteria Decision Making Process, Journal of the Textile Institute, 101 (4), 304-309, 2010.

Abhijit Majumdar, Selection of Raw Materials in Textile Spinning Industry using Fuzzy Multi-criteria Decision Making Approach, Fibers and Polymers, 11(1), 121-127, 2010.

Bhabani K. Satapathy, Abhijit Majumdar, Bharat S. Tomar, Optimal design of flyash filled composite friction materials using combined Analytical Hierarchy Process and Technique for Order Preference by Similarity to Ideal Solutions approach, Materials and Design, 31, 1937–1944, 2010.

Rawal, A.(2010), Structural Analysis of Pore Size Distribution of Nonwovens, Journal of The Textile Institute, Vol. 101, pp.350-359.

Rawal, A., Lomov, S.V. and Verpoest, I. (2010), Theory of Fibre Contacts and its Applications to the Properties of Nonwoven Structures, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 11, pp. 57-62. 

Rawal, A., Priyadarshi, A., Lomov, S.V., Verpoest, I. and Vankerrebrouck J. (2010), Tensile Behaviour of Thermally Bonded Nonwoven Structures: Model Description, Journal of Materials Science, Vol.45, pp.2274-2284.

Rawal, A. Bending Rigidity of Thermally Bonded Nonwoven Structures, Fibers & Polymers (Accepted, in Press).

Patnaik, A, Tejyan, S. and Rawal A. Soil Erosion Behaviour of Needlepunched Nonwoven Reinforced Composites, Research Journal of Textile and Apparel (Accepted, in Press).

Rawal, A. P.V., Kameswara Rao, Russell, S. and Jeganathan, A. Effect of Fibre Orientation on Pore Size Characteristics of Nonwoven Structures, Journal of Applied Polymer Science (Accepted, in Press).

39. M. Böhme, B. Kuila, H. Schlörb, Bhanu Nandan, M. Stamm, Thin Films of Block Copolymer Supramolecular Assemblies: Microphase Separation and Nanofabrication, Physica Status Solidi (B), in press (2010) (Feature Article).

38. A. Horechyy, N. E. Zeferopoulos, Bhanu Nandan, P. Formanek, F. Simon, M. Stamm, Highly Ordered Arrays of Magnetic Nanoparticles Via Block Copolymer Assembly, Journal of Materials Chemistry 20, 7734, 2010. (Selected for publication in Virtual Journal of Nanoscale Science and Technology)

37. Bhanu Nandan, Microphase Separation in Thin Films of Supramolecular Assemblies Composed of a Triblock Copolymer and Low Molecular Weight Additive, Journal of Polymer Science, Polymer Physics Edition 48, 1594, 2010.

36. E. B. Gowd, Bhanu Nandan, N. C. Bigall, A. Eychmüller, P. Formanek, M. Stamm, Hexagonally Ordered Arrays of Metallic Nanodots from Thin Films of Functional Block Copolymers, Polymer 51, 2661, 2010.

35. C.-Y. Ci, H.-L. Chen, M.-S. Hsiao, J.-H. Chen, Bhanu Nandan, Crystallization in the Binary Blends of Crystalline-Amorphous Diblock Copolymers Bearing Chemically Different Crystalline Block, Macromolecules 43, 3376, 2010.

34. Bhanu Nandan, M. K. Vyas, M. Böhme, M. Stamm, Composition Dependent Phase Transitions and Pathways in Switching of Fine Structure in Thin Films of Supramolecular Assemblies, Macromolecules 43, 2463, 2010.

Abhijit Majumdar, Samrat Mukhopadhyay and Ravindra Yadav, Thermal properties of knitted fabrics made from cotton and regenerated bamboo cellulosic fibres, International Journal of Thermal Sciences, Volume 49, Issue 10, October 2010, Pages 2042-2048

Deepti Gupta, T A Amera and R. Chattopadhyay, “ Electrically Conducting Textiles” Asian Technical Textiles , Vol. 4, No1, 47- 50 ( 2010)

Rawal, A.(2009), Application of Theory of Compression to Thermal Bonded Nonwoven Structures, Journal of The Textile Institute, Vol. 100, pp. 28-34.

A. Das, R. Alagirusamy and K. Rajan Nagendra, Study On Filtration Characteristics of Spun-Laid Nonwoven Fabrics- Indian Journal of Fibre and Textile Research (In Press).

A Das, V K Kothari, A Kothari, A. Kumar and S. K. Tuli, Effect of Various Parameters on Electromagnetic Shielding Effectiveness of Textile Fabrics- Indian Journal of Fibre and Textile Research (In Press).

Rawal, A. Majumdar, A., Anand, S. and Shah, T. (2009), Predicting the Properties of Needlepunched Nonwovens using Artificial Neural Network, Journal of Applied Polymer Science, Vol. 112, pp. 3575-3581.

A. Das, S. M. Ishtiaque, S. Singh and H. C. Meena, Tensile characteristics of yarns under water,Indian Journal of Fibre and Textile Research (In press) 

KVP Singh, A Das and A Chatterjee, Study on physiological comfort of fabrics made up of structurally modified friction spun yarns: Part I – Vapour transmission, Indian J Text. Res. (In press)

A. Das, P. Chakroborty and P. Kumar, Study on Fabric Hairiness using Image Processing Technique-Research Journal of Textile and Apparel (In press) 

Brojeswari Das, A. Das, V.K. Kothari, R. Fanguiero and M. de Araújo, Moisture Flow through Blended Fabrics – Effect of Hydrophilicity, Journal of Engineered Fibers and Fabrics (In press)

Ghosh M, Banerjee P K & Rao G V, Development of Asphalt Overlay Fabric from Jute, [accepted for publication in the Journal of Textile Institute in September, 2008]

A. Das, S. M. Ishtiaque and R. P. Singh, Packing of Micro-porous Yarns: Part II – Optimization of Fbaric Characteristics – Journal of the Textile Institute, 2009, Vol 100, No. 3, Page- 207-217. 

S. M. Ishtiaque, S. N. Singh, A. Das, S. Mittal and V. Dave, Optimization of fluid flow phenomena inside transport duct of DREF-III friction spinning machine: Part III - CFD Approach–The Journal of the Textile Institute (In press)

KVP Singh, A Das and A Chatterjee, Study on physiological comfort of fabrics made up of structurally modified friction spun yarns: Part II – Liquid transmission – Indian J Fib. Text. Res. (In press) 

Sourabh Ghosh, Michael Laha, Sourav Mondal, Sejuti Sengupta, David L Kaplan, In vitro Model of Mesenchymal Condensation During Chondrogenic Development, Biomaterials, in press

Rawal, A., Shah, T. and Anand, S.C (2009), Extrusion of Polyethylene through a Square Slot in Rotating Die Systems, Textile Research Journal, Vol.79, pp. 483-494.

RS Tigli, S Ghosh, MM Laha, NK Shevde, L Daheron, J Gimble, M Gümüşderelioğlu, DL Kaplan, Comparative Chondrogenesis of Human Cell Sources in 3D Scaffolds, Journal of Tissue Engineering & Regenerative Medicine, 3(5), 2009, 348-360 

33. E. B. Gowd, Bhanu Nandan, N. C. Bigall, A. Eychmüller, P. Formanek, H. Schlörb, M. Stamm, Highly Ordered Palladium Nanodots and Nanowires from Switchable Block Copolymer Thin Films, Nanotechnology 20, 415302, 2009.

32. K. Kumar, Bhanu Nandan, V. Luchnikov, P. Formanek, F. Simon, A. Vyalikh, U. Scheler, M. Stamm, A Novel Approach for the Fabrication of Silica and Silica/Metal Hybrid Tubes, Chemistry of Materials 21, 4282, 2009.

31. B. Kuila, Bhanu Nandan, M. Böhme, A. Janke, M. Stamm, Vertically Oriented Arrays of Polyaniline Nanorods and Their Super Electrochemical Properties, Chemical Communications 5749, 2009.

30. Bhanu Nandan, E. B. Gowd, N. C. Bigall, A. Eychmüller, P. Formanek, P. Simon, M. Stamm, Arrays of Inorganic Nanodots and Nanowires Using Nanotemplates Based on Switchable Block Copolymer Supramolecular Assemblies, Advanced Functional Materials 19, 2805, 2009 (This article was listed as one of the most accessed articles in Advanced Functional Materials in July 2009).

29. K. Kumar, Bhanu Nandan, V. Luchnikov, E. B. Gowd, M. Stamm, Fabrication of Metallic/Bimetallic Microtubes Using Self-Rolled Polymer Tubes as Templates, Langmuir 25, 7667, 2009

28. M. K. Vyas, Bhanu Nandan, K. Schneider, M. Stamm, Nanowear Studies in Chemically Heterogeneous Responsive Polymeric Brushes by Surface Force Microscopy, European Polymer Journal 45, 1367, 2009.

27. W.-S. Chiang, C.-H. Lin, C.-L. Yeh, Bhanu Nandan, P.-N. Hsu, C.-W. Lin, W.-C. Chen, H.-L. Chen, Tetragonally Packed Cylinder structure of Comb-Coil Block Copolymer Bearing Hetero-Arm Star Architecture, Macromolecules 42, 2304, 2009. (This article was listed as one of the most downloaded articles from Macromolecules in March 2009)

26. M. S. Khatri, H. Schlörb, S. Fähler, L. Schultz, Bhanu Nandan, M. Böhme, R. Krenek, M. Stamm, Electrodeposition of Co-Pt Continuous Films and Nanowires, Electrochimica Acta 54, 2536, 2009.

A. Das, R. Alagirusamy and K. Rajan Nagendra, Study on Needle-punched Nonwoven Fabrics Made from Shrinkable and Non-shrinkable Acrylic Blends: Part III - Filtration Characteristics – Journal of the Textile Institute (In press)

S. M. Ishtiaque, A. Kumar, A. Das and P. B. Tholeti, Development of Image Processing Based System to Study Yarn Structure during Extension – Journal of the Textile Institute (In press)

A. Das, R. Alagirusamy, D. Goel and P. Garg, Internal Pressure Profiling of Medical Bandages –– Journal of the Textile Institute (In press)

A. Das, S. M. Ishtiaque, and P. Badbade, Study on Fibre Openness Using Image Processing Technique– Journal of the Textile Institute (In press)

Brojeswari Das, A. Das, V.K. Kothari, R. Fanguiero and M. de Araújo, Studies on Moisture Transmission Properties of PV Blended Fabrics- – Journal of the Textile Institute (In press)

A. Das, M. Zimniewska and R. D. Mal, Studies on Cotton-acrylic Bulked Yarns Produced form Different Spinning Technologies: Part II – Fabric Characteristics -– Journal of the Textile Institute (In press)

A. Das, R. Alagirusamy and B. Banerjee, Study on Needle-punched Nonwoven Fabrics Made from Shrinkable and Non-shrinkable Acrylic Blends: Part II - Transmission Behaviour–– Journal of the Textile Institute (In press)

Vinay Kumar Midha, A . Mukhopadhyay, R Chattopadhyay and V. K. Kothari, “ Studies on tensile properties of sewing threads at different sewing stages”, Textile research Journal, 2009, Vol. 79, No. 13, 1155-1167

A. Das and R. D. Mal , Studies on Cotton-acrylic Bulked Yarns Produced form Different Spinning Technologies: Part I – Yarn Characteristics – Journal of the Textile Institute (In press)

Vinay Kumar Midha, V. K. Kothari, R Chattopadhyay and A . Mukhopadhyay, “ Effect of high speed sewing on the tensile properties of sewing threads at different stages of sewing”, International journal of clothing Science & Technology, 2009, 21,No.4, 217 – 238

A. Das, R. Alagirusamy and B. Banerjee, Study on Needle-punched Nonwoven Fabrics Made from Shrinkable and Non-shrinkable Acrylic Blends: Part I - Compressional Behaviour– Journal of the Textile Institute (In press) 

Rawal, A., Lomov, S.V. and Verpoest, I. (2008), An Environmental Scanning Electron Microscope Study of a Through-air Bonded Structure under Tensile Loading, Journal of The Textile Institute , Vol. 99, pp. 235-241.

Naveen V. Padaki , B.L. Deopura and R. Alagirusamy “Low velocity drop weight impact properties of textile reinforced composites” Indian Journal of Fibres and Textile Research, Vol. 33, June 2008, 189-202

Abhijit Majumdar & Anindya Ghosh, Yarn strength modelling by fuzzy expert systems, Journal of Engineered Fibres and Fabrics, Vol. 3, Issue 4, 61-68, 2008

S. Mukhopadhyay and Srikanta R, " Effect of ageing on properties of sisal – polyolefin composites” in Polymer Degradation and Stability, Elsevier,Volume 93, Issue 11, November 2008, Pages 2048-2051 

Abhijit Mondal, Ritutapan Borha, Avishek Mukherjee, Sandip Basu Manjeet Jassal, Ashwini K. Agrawal, Electrospun Self-assembled Nanofiber Yarns, fibers Journal of Applied Polymer Science, 2008, accepted for publication.

R Purwar, P Mishra and M Joshi, Antibacterial finishing of cotton textiles using Neem extract, AATCC Review ,vol 8(2),(2008) 35-44.

Sahoo, A., Jassal M.; Agrawal, A. K. pH Responsive Fibers Based on Acrylonitrile Acrylic acid Block Copolymers: Effect of Spinning Conditions and Post Spinning Operations on Response and Mechanical Properties, J. Appl. Polym. Science. (2008), Accepted for publication

S Rana, R Alagirusamy and M Joshi, A Review on carbon epoxy nanocomposites, Journal of Reinforced Plastics and Composites (Accepted for Publication)

Palanikkumaran, M.; Jassal M.; Agrawal, A. K. Novel Water-Proof Breathable Coatings Based on Poly(vinylalcohol) for cellulosic Fabric, Journal of Industrial Textile, 2008, accepted for publication 

Ishtiaque, S.M., A. Mukhopadhyay, and A. Kumar, Influence of draw frame speed and its preparatory on ring-yarn properties. Journal of the Textile Institute, 2008. 99(6): p. 533-538.

Ishtiaque, S.M., A. Das, and R.P. Singh, Packing of micro-porous yarns: Part I. Optimization of yarn characteristics. Journal of the Textile Institute, 2008. 99(2): p. 147-155.

Ishtiaque, S.M., R.S. Rengasamy, A. Ghosh, and B.R. Das, Fabric Assistance in Woven Fabrics Made from Different Spun Yarns. Indian Journal of Fibre & Textile Research, 2008. 33(4): p. 377-382.

Ishtiaque, S.M., B.R. Das, A. Kumar, and M. Ramamoorthy, Static and dynamic failure mechanisms of cotton yarns. Indian Journal of Fibre & Textile Research, 2008. 33(2): p. 111-118.

Ghosh M, &Banerjee P K; Studies on Jute asphalt composites, Journal of Applied Polymer Science, 109(2008) 3165-3172

Abhijit Majumdar, A. Ghosh, S. S. Saha, Ayan Roy, Subir Barman, Dhrubajyoti Panigrahi and Anjan Biswas, Empirical modelling of tensile strength of woven fabrics, Fibers and Polymers, 9(2), 240-245, 2008

Chirima, G., Ravirala, N., Rawal, A., Simkins, V.R., Alderson, A. and Alderson, K.L.(2008), The effect of processing parameters on the fabrication of auxetic extruded polypropylene films, Physica Status Solidi, Vol. 11, pp. 2383-2390.

Rawal, A., Anand, S.C. and Shah, T. (2008), Optimization of Parameters for the Production of Needlepunched Nonwoven Geotextiles, Journal of Industrial Textiles, Vol. 37, pp. 341-356.

Rawal, A. (2008), Effect of Dynamic Loading on Pore Size of Needlepunched Nonwoven Geotextiles, Journal of the Textile Institute, Vol.99, pp.9-15.

25. K. Kumar, V. Luchnikov, Bhanu Nandan, V. Senkovsky, M. Stamm, Self-rolled Polymer Microtubes: Combinatorial Approach to the Study of the Formation Process, European Polymer Journal 44, 4115, 2008.

24. W.-S. Chiang, C.-H. Lin, Bhanu Nandan, C.-L. Yeh, W.-C. Chen, H.-L. Chen, Molecular Architecture Effect on the Self-Assembly Behavior of Comb-Coil Block Copolymers Displaying Lamellae-within-Lamellae Morphology, Macromolecules 41, 8138, 2008.

23. M. K. Vyas, Bhanu Nandan, K. Schneider, M. Stamm, Nanowear Studies on Reversibly Switchable Polystyrene-Poly(acrylic acid) Mixed Brushes, Journal of Colloid and Interface Science 328, 58, 2008.

22. M. K. Vyas, K. Schneider, Bhanu Nandan, M. Stamm, Switching of Friction by Binary Polymer Brushes, Soft Matter 4, 1024, 2008.

Abhijit Majumdar and Shib Sankar Saha, A Novel Fabric Thickness and Compression Tester Using Magnetic Inductance Principle, Journal of the Textile Institute, 99 (4), 359-362, 2008

Abhijit Majumdar, Mihai Ciocoiu and Mirela Blaga, Modelling of ring yarn unevenness by soft computing approach , Fibres and Polymers, January 2008.

A. Das, A. Jain and A. Pant, Study on the Liquid Flow Behavior of Cotton Wick – Fibers and Polymers, 2008, Vol. 9 (2), 176-186.

Brojeswari Das, A. Das, V.K. Kothari, R. Fanguiero and M. de Araújo, Effect of Fibre Diameter and Cross-Sectional Shape on Moisture Transmission Through Fabrics, Fibers and Polymers, 2008, Vol. 9 (2), 225-231.

Design of Apparel fabrics : Role of fibre, yarn and fabric parameters on its functional attributes, R. Chattopadhyay, Journal of Textile engineering, 2008 Vol. 54, N0.6. 179-190

R. Chattopadhyay, Design of Apparel fabrics : Role of fibre, yarn and fabric parameters on its functional attributes, R. Chattopadhyay, Journal of Textile engineering, 2008 Vol. 54, N0.6. 179-190

C Feder-Mengus, S Ghosh, A Reschner, I Martin, GC Spagnoli, New dimensions in tumor immunology: what does 3D culture reveal? Trends in Molecular medicine, 2008 

Click here for additional information

S Ghosh, ST Parker, X Wang, DL Kaplan, JA Lewis, Direct-Write Assembly of Micro-Periodic Silk Fibroin Scaffolds for Tissue Engineering Applications, Advanced Functional Materials, 18 (13) 2008, 1883-1889

Click here for additional information

M. L. Gulrajani, Deepti Gupta, S. Periyasamy, S. G. Muthu, Preparation and application of silver nanoparticles on silk for imparting antimicrobial properties, Journal of Applied Polymer Science, 108 (1), (2008)614 – 623, 10.1002/app.27584 

Deepti Gupta, Avik Banerjee, Protective clothing - Body armour - A historical perspective, Industria Textila, Dec.2008

Rawal, A.(2007), A Cross-Plane Permeability Model for Needlepunched Nonwoven Structures, Journal of The Textile Institute, Vol. 97, pp.527-532.

Rawal, A. and Anandjiwala, R.D.(2007), Comparative Study Between Needlepunched Nonwoven Geotextile Structures Made from Flax and Polyester Fibres, Geotextiles & Geomembranes, Vol. 25, pp.61-65.

Rawal, A., Lomov, S.V., Ngo, T, Verpoest, I. and Vankerrebrouck J.(2007), Mechanical Behavior of Thru-air Bonded Nonwoven Structures, Textile Research Journal, Vol. 77, pp. 417-431.

V. K. Kothari, A. Das and A. Sarkar, Effect of Processing Parameters on Properties of Layered-Composite Needle-Punched Nonwoven Air Filters – Indian Journal of Fibre and Textile Research, 32, June 2007, Pp. 196-201. 

V. K. Kothari, A. Das and S. Singh, Filtration Behavior of Woven and Nonwoven Fabrics – Indian Journal of Fibre and Textile Research, 32, June 2007, Pp. 214-220

V. K. Kothari, A. Das and Sreedevi R, Cut Resistance of Textile Fabrics: A Theoretical and An Experimental Approach – Indian Journal of Fibre and Textile Research, 32, September 2007, 306-311. 

A. Das, V. K. Kothari and V. Nagaraju, Frictional Characteristics of Woven Suiting and Shirting Fabrics – Indian Journal of Fibre and Textile Research, 32, September 2007, 337-343. 

A. Das and S. M. Ishtiaque, Static and Kinetic Frictional Characteristics of Staple Fibres and Woven Fabrics – Indian Journal of Fibre and Textile Research, Vol. 32, March, 2007, 80-87.

S. Periyasamy, M.L. Gulrajani and Deepti Gupta, Modification of one side of mulberry silk fabric by monochromatic VUV excimer lamp, European Polymer Journal, 43 (2007) 4573-4581. doi:10.1016/j.eurpolymj.2007.07.014

S. Periyasamy, M.L. Gulrajani and Deepti Gupta, Preparation of a multifunctional mulberry silk fabric having hydrophobic and hydrophilic surfaces using VUV excimer lamp , Surface & Coatings Technology, 201 (2007) 7286–7291, doi: 10.1016/j.surfcoat.2007.01.038 http://dx.doi.org/10.1016/j.surfcoat.2007.01.038

Deepti Gupta and Adane Haile, Multifunctional Properties of Cotton Fabric Treated with Chitosan and Carboxymethyl Chitosan, Carbohydrate Polymers, 69 (2007) 164–171. doi:10.1016/j.carbpol.2006.09.023, http://dx.doi.org/10.1016/j.carbpol.2006.09.023

Vinayak Ogale and R. Alagirusamy, “Tensile Properties of GF/Polyester, GF/Nylon and GF/Polypropylene Commingled Yarns” Journal of the Textile Institute, Vol 98, No. 1, 2007, p37

M.T. Mathew , Naveen V. Padaki , L. A. Rocha, J.R. Gomes, R. Alagirusamy , B.L. Deopura, R. Fangueiro “ Tribological properties of the directionally oriented warp knit GRPF composites” Wear 263 (2007) 930–938.

R.Alagirusamy, Vinayak Ogale and Manick Bhowmick “Air flow behaviour in commingling nozzles and their influence on properties of commingled yarns” Indian Journal of Fibres and Textile Research, Vol. 32, Dec 2007, 414-420.

Isothermal Crystallization of HDPE/Octamethyl Polyhedral Oligomeric Silsesquioxane Nanocomposites: Role of POSS as a Nanofiller, Journal of Applied Polymer Science, 2007 (105), 978–985 

Deepti Gupta and Somes Bhaumik, Antimicrobial treatment for Textiles, Indian Journal of Fibre and Textile Research, Vo. 32, June (2007) 254-263

Deepti Gupta and Ankur Laha, Antimicrobial Activity of Cotton Fabric Treated with Quercus infectoria extract, Indian Journal of Fibre and Textile Research, Vol.32, March 2007, 88-92

Deepti Gupta and Ruchi, UPF characteristics of natural Dyes and textiles dyed with them, Colourage, Vol. 54(4),April 2007,pp75-80

Neckar, B. and Das, D. Modeling of yarn shrinkage due to washing, Journal of Textile Institute 98, 479–482, 2007

Sahoo, A., Jassal M.; Agrawal, A. K. pH Responsive fibers based on acrylonitrile copolymers: Effect of bulky side group on response and mechanical properties, Textile Science and Engineering, 2007, vol. 44(3), 149-158.

S Ghosh, M. Joshi, D. Ivanov, C. Feder-Mengus, G. Spagnoli, I. Martin, P. Erne, T. Resink, Use of multicellular tumor spheroids to dissect endothelial cell-tumor cell interactions: a role for T-cadherin in tumor angiogenesis. FEBS Letters. 2007;581(23):4523-28 

Click here for additional information

Gupta, K. K.; Jassal, M. Agrawal, A. K. Functional Finishing of Cotton Using Titanium Dioxide and Zinc Oxide Nanoparticles, Research Journal of Textile and Apparel, 2007, in press.

C Feder*, S Ghosh*, Weber WP, Wyler S, Zajac P, Terrachianno L, Oertli D, Heberer M, Martin I, Spagnoli GC, Reschner A, Multiple mechanisms underlie defective recognition of melanoma cells cultured in three-dimensional architectures by antigen specific cytotoxic T lymphocytes, British Journal of Cancer, 2007, 96(7):1072-82 

Click here for additional information

Sahoo, A., Jassal M.; Agrawal, A. K. Discovery of a unique dual response in acrylonitrile copolymers, Smart Materials and Structures. 2007, 16 1843-1848.

Das, Apurba; Sharma, Vikas; Yadav, Pankaj; Ishtiaque, Saiyed Muzffar. (Northern India Textile Research Association, India). Indian Pat. Appl. (2007), 12pp.

Kartick Kumar Samanta, Manjeet Jassal & Ashwini K. Agrawal,Antistatic Finishing of Textile Using Atmospheric Pressure Cold Plasma Treatment, Plasma 2007

Deepti Gupta, Periyasamy Sidhan and Abhishek Banerjee, Basic dyeable polyester- a new approach using 172 nm UV excimer lamp, Coloration Technology 2007, Coloration Technology, 123 (2007) 248–251. doi: 10.1111/j.1478-4408.2007.00091.x

M Joshi, S Wazed Ali and S Rajendran, Antibacterial Finishing of Polyester /Cotton Blend Fabrics using Neem (Azadirachta Indica): A Natural Bioactive Agent, Journal of Applied Polymer Science, 106(2)(2007) 793-800

Patnaik, A., Rengasamy, R. S., Ishtiaque, S. M., & Ghosh, A. (2007). Hairiness of spun yarns and their reduction using air-nozzle in winding. Journal of the Textile Institute, 98(3), 243-249.

M Joshi and B S Butola, Isothermal crystallisation of HDPE/POSS Nanocomposite: Effect of POSS as Nanofiller, Journal of Applied Polymer Science, 105(2)(2007) 978-985.

Das, A., V. Sharma, P. Yadav, and S.M. Ishtiaque, A device for measuring frictional characteristics. 2007, (Northern India Textile Research Association, India). India. p. 12pp.

Ishtiaque, S.M., A. Mukhopadhyay, and A. Kumar, Impact of high-speed draw frame and its preparatory on fibre orientation parameters at sliver. Journal of the Textile Institute, 2007. 98(6): p. 501-512.

Patnaik, A., R.S. Rengasamy, S.M. Ishtiaque, and A. Ghosh, Hairiness of spun yarns and their reduction using air-nozzle in winding. Journal of the Textile Institute, 2007. 98(3): p. 243-249.

Anasuya Sahoo, Manjeet Jassal, Ashwini K. Agarwal "pH Responsive Fibers based on acrylonitrile copolymers: Effect of bulky side group on response and mechanical properties" Hankook Sumyu Gonghakhoeji (2007), 44(3), 149-158. 

Functional Finishing of Cotton Using Titanium Dioxide and Zinc Oxide Nanoparticles Kamal K. Gupta, Manjeet Jassal,* Ashwini K. Agrawal, Journal of Textile and Apparel Vol.11 No. 3,2007. 

Periyasamy Siddhan, Manjeet Jassal, Ashwini K. Agrawal Core Content and Stability of n-Octadecane-Containing Polyurea Microencapsules Produced by Interfacial Polymerization ,Journal of Applied Polymer Science, Vol. 106, 786–792 (2007)

Anasuya Sahoo, Manjeet Jassal, Ashwini K. Agrawal ,Influence of the copolymer architecture and composition on the response and mechanical properties of pH-sensitive fibersJournal of Applied Polymer Science,Volume 105, 3171-3182 (2007)

Sahoo, Anasuya; Ramasubramani, K. R. T.; Jassal, Manjeet; Agrawal, Ashwini K. Effect of copolymer architecture on the response of pH sensitive fibers based on acrylonitrile and acrylic acid.European Polymer Journal (2007), 43(3), 1065-1076

Das-A; Ishtiaque-SM, Static and kinetic frictional characteristics of staple fibres and woven fabrics, Indian J. Fibre Text. Res., 2007, 32(1), 80-87.

Kartick Kumar Samanta, Manjeet Jassal and Ashwini K.Agrawal, Plasma processing, Nano Trends ( in press) 

K. Latha, Mohit Goyal, Manjeet Jassal, Ashwini K. Agrawal and C. Ramesh ,Effect Of Processing Conditions on the Preparation Of Nylon6/Nanoclay Composite Fibers, Nano Trends ( in press ) 

Dyeing and antimicrobial studies on polyamine/epichlorohydrin condensate incorporated viscose rayon fibres. Bairagi, N.; Gulrajani, M. L.; Deopura, B. L.; Dept of Textile Technology, IIT Delhi, New Delhi, India. Coloration Technology (2007), 123, 46-53. Publisher: Society of Dyers and Colourists.

21. J.-Y. Hsu, I.-F. Hseih, Bhanu Nandan, F.-C. Chiu, J.-H. Chen, U.-S. Jeng, H.-L. Chen, Crystallization Kinetics and Crystallization-Induced Morphological Formation in the Blends of Poly(ε-caprolactone)-block-Polybutadiene and Polybutadiene Homopolymer, Macromolecules 40, 5014, 2007.

20. Bhanu Nandan, J.-Y. Hsu, A. Chiba, H.-L. Chen, C.-S. Liao, S.-A. Chen, H. Hasegawa, Highly Oriented Nanowires From the Hierarchical Self-Assembly in Supramolecular Complex of Polyaniline with -Methoxy Poly(ethylene oxide) Phosphates, Macromolecules 40, 395, 2007 (Communication to the Editor). (This article was listed as one of the most accessed articles in Macromolecules in the period Jan-Mar 2007)

A. Das, V. K. Kothari, S. Makhija, Avyaya, Development of High-absorbent Light-weight Sanitary Napkin , Journal of Applied Polymer Science, 2007, Vol. 107 (3) , Pages 1466 – 1470

A. Das, S. M. Ishtiaque and Prashant Vishnoi, Influence of Process Parameters on Properties of Open-End and Core-Sheath Friction Spun Acrylic Yarns – Journal of the Textile Institute, 2007, Vol 98, No. 6, Page- 513- 521 

R. Chattopadhyay and S. K. Sinha” Spinning limits and properties of Dref -3 yarns” Melliand International 1/ 2007 p-39-43

R. Chattopadhyay and S. K. sinha, “ A study on spinning limits and yarn properties with progressive change in yarn count in friction spinning”, AUTEX Research Journal,7,No.1, 2007

Brojeswari Das, A. Das, V. K. Kothari, R. Fangueiro and M. de Araujo, Moisture Transmission Through Textiles - Part II: Evaluation Methods And Mathematical Modelling - AUTEX Research Journal, Vol. 7, No3, September 2007, pp. 194-216.

Brojeswari Das, A. Das, V. K. Kothari, R. Fangueiro and M. de Araujo, Moisture Transmission Through Textiles -Part I: Processes Involved In Moisture Transmission and The Factors at Play, Autex Research Journal, Vol. 7, No. 2, June 2007, Page – 100-110 

A. Das, V. K. Kothari and A. Sadachar, Study on Characteristics of Compact Yarns under Dynamic State, Fibers and Polymers, 2007, Vol. 8 (1), 111-115

A. Das, V. K. Kothari and A. Sadachar, Comfort Characteristics of Fabrics Made of Compact Yarns, Fibers and Polymers, 2007, Vol. 8 (1), 116-122.

A. Das, V. K. Kothari and M. Balaji, Studies on Cotton-Acrylic Bulked Yarns and Fabrics: Part I – Yarn Characteristics, Journal of the Textile Institute, 2007, Vol 98, No. 3, Page- 261- 267.

A. Das, V. K. Kothari and M. Balaji, Studies on Cotton-Acrylic Bulked Yarns and Fabrics: Part II – Fabric Characteristics, Journal of the Textile Institute, 2007, Vol 98, No. 4, Page- 363- 375.

S.M. Ishtiaque, A. Das and Prashant Vishnoi, Friction Spinning Machine Variable and Yarn Structure: Configuration of Fibre in Relation to Machine Variables, Journal of the Textile Institute, 2007, Vol 98, No. 4, Page- 345- 354. 

Rawal, A., Moyo, D., Soukupova, V.and Anandjiwala, R.D.(2007),Optimization of Parameters in Hydroentanglement Process, Journal of Industrial Textiles, Vol. 36, pp. 207-220.

Rawal. A, Potluri, P. and Steele, C. (2007), Prediction of Yarn Paths Formed on a Square Pyramid, Journal of Industrial Textiles, Vol. 36, pp. 221-226.

S Mukhopadhyay, B.L. Deopura, and R. Alagirusamy, “Mechanical properties of Polypropylene Filaments drawn on varying post spinning temperature gradients” Fibres and Polymers, 2006, vol7, no.4, p432

S. Mukhopadhyay, B.L. Deopura, and R. Alagirusamy, Effect of drawing different MFI polypropylene filaments on a gradient heater, AUTEX Research Journal, Vol. 6, No 3, 138-141, September 2006

Naveen V Padaki, R. Alagirusamy and B.S. Sugun, “Knitted Preforms for Composite Applications” Journal of Industrial Textiles, Vol. 35, No. 4, April 2006, p295

S Mukhopadhyay, B.L. Deopura, and R. Alagirusamy, "Studies on production of Polypropylene filaments with increased temperature stability" Journal of Applied Polymer Science, Vol 101, 2006 p838.

Deepti Gupta, Naveen Garg, Komal Arora and Neha Priyadarshini, Body measurement charts for garment manufacture based on a linear programming approach, Journal of Textile and Technology Management, Vol.5 (1) 2006

B. K. Sharma and A. Das, Application of Information Technology to Manage the Textile Quality Control, Textile Industry and Trade Journal, Vol. 44, No. 5-6, May-June, 2006, Pp. 21-24

S. Mukhopadhyay, Prem Kumar and D L Venkatesh Babu “Role of Fabric Structure on Moisture Retention and its effect on Concrete Strength” Journal of Industrial Textiles, London. Journal of Industrial Textiles, Vol. 36, No. 1, 59-72 (2006) 

Neckar, B., Soni, M. K., and Das, D. Modeling of radial fiber migration in yarns, Textile Research Journal 76, 486–491, 2006 

Neckar, B. and Das, D., Mechanics of parallel fiber bundles, Fibers & Textile in Eastern Europe 14, 23–28, 2006

Banerjee P K & Bhat Prabhakar, The influence of yarn torsional rigidity on dimensions of cotton knitted loops, Ind. J. of Fibre & Text. Res., Vol 31 (2006) 409-414

Banerjee P K, Technological innovations in woven fabric manufacturing process, Ind. J. of Fibre & Text. Res., Vol 31(2006) 125-133

Ishtiaque, S. M.; Salhotra, K. R.; Kumar, A. Department of Textile Technology, Indian Institute of Technology, New Delhi, India. Journal of the Textile Institute (2006), 97(4), 285-293. 

Salhotra, K. R.; Ishtiaque, S. M.; Kumar, A. Department of Textile Technology, Indian Institute of Technology, New Delhi, India. Journal of the Textile Institute (2006), 97(4), 271-283.

M.Joshi and V. Viswanathan, High Performance Filaments from compatibilised PP/clay nanocomposites, Journal of Applied Polymer Science, 102(3) (2006) 2164-2174

M. Joshi, B. S. Butola, George Simon and Natalia Kukalevab, Rheological and viscoelastic behaviour of HDPE/ Octa methyl POSS nanocomposites, Macromolecules, 39 (2006) 1839-1849.

M Joshi ,Nanotechnology : Applications in Textiles, Asian dyer,Dec2006,49-52

M.Joshi. Kushan Banerjee, Prasanth R and V Thakare, Polymer-Clay Nanocomposite basedCoatings For Enhanced Gas Barrier Property, Indian Journal of Fiber and Textile Research, March 2006,pg 202-213

Manjeet Jassal, Ashwini K. Agrawal , Arnab K. Ghosh ,K. R. T.Ramasubramani and Anasuya Sahoo, Stimuli Sensitive Behaviour of Modified polyacrylonitrile Fibres, Journal of Textile and Apparel vol.10 No.2 (May 2006),58-68. 

Samanta, Kartick; Jassal, Manjeet; Agrawal, Ashwini K. Atmospheric pressure glow discharge plasma and its applications in textile. Indian Journal of Fibre & Textile Research (2006), 31(1), 83-98. 

Jassal, Manjeet; Agrawal, Ashwini K.; Save, Ninad S. Thermoresponsive smart textile. Indian Journal of Fibre & Textile Research (2006), 31(1), 52-65. 

S Ghosh, C Feder-Mengus, P Zajac, G Spagnoli, I Martin, A Reschner, Three dimensional culture of melanoma cells results in impaired immunorecognition by cytotoxic T lymphocytes specific for tumor-associated antigen, Journal of Immunology, 2006, 176, S273-S273 

A. Chatterjee and B. L. Deopura, High Modulus and High Strength PP Nano-composite Filament, Composite, Part A, Applied Science and Manufacturing , 37,(2006) 813-817.

Kumar-A; Salhotra-KR; Ishtiaque-SM, Analysis of spinning process using the Taguchi method. Part V: Effect of spinning process variables on physical properties of ring, rotor and air-jet yarns, J. Text. Inst., 2006, 97(6), 463-473.

Kumar-A; Ishtiaque-SM; Salhotra-KR, Study of effect of spinning process variables on the packing density of ring, rotor and air-jet yarns using the Taguchi method, Autex Res. J.., 2006, 6(3), 122-135.

19. Bhanu Nandan, C.-H. Lee, H.-L. Chen, W.-C. Chen, Molecular Architecture Effect on the Microphase Separations in Supramolecular Comb-Coil Complexes of Polystyrene-block-Poly(2-vinyl pyridine) with Dodecyl benzene Sulfonic acid: AnBn Hetero-Arm Star Copolymer, Macromolecules 39, 4460, 2006.

Abhijit Majumdar, Bijan Sarkar & Prabal Kr. Majumdar, An Investigation on Yarn Engineering Using Artificial Neural Networks, Journal of the Textile Institute, 2006, No 5, Pages 429-434.

Kumar-A; Ishtiaque-SM; Salhotra-KR, Analysis of spinning process using the Taguchi method. Part IV: Effect of spinning process variables on tensile properties of ring, rotor and air-jet yarns, J. Text. Inst., 2006, 97(5), 385-390.

18. Bhanu Nandan, J.-Y. Hsu, H.-L. Chen, Crystallization Behavior of Crystalline-Amorphous Diblock Copolymers Consisting of a Rubbery Amorphous Block, Polymer Reviews 46, 143, 2006 (Invited Review).

Kumar-A; Ishtiaque-SM; Salhotra-KR, Analysis of spinning process using the Taguchi method. Part III: Effect of spinning process variables on migration parameters of ring, rotor and air-jet yarn, J. Text. Inst., 2006, 97(5), 377-384.

Abhijit Majumdar, Bijan Sarkar & Prabal Kr. Majumdar, Raw Material Selection and Control in Textile Spinning Industry Using Analytic Hierarchy Process, Industrial Engineering Journal, Special Issue 2006, Pages 30-36.

Abhijit Majumdar, Bijan Sarkar & Prabal Kr. Majumdar, A new algorithm of cotton fibre selection and laydown using TOPSIS method of multi-criteria decision making, Indian Journal of Fibre and Textile Research, Vol. 31, June 2006, Pages 248-244.

Abhijit Majumdar, Comments on Analysis of Spun Yarn Failure: Translation of Strength from Fibre Bundle to Different Spun Yarns, Textile Research Journal, December 2006, Pages 936-937.

S. K. Sinha and R. Chattopadhyay, “ Influence of sheath structure on twist and diameter of Dref-3 polyester- wool friction spun yarn”, Indian Journal of fibre and Textile Research 31, ( 2006) 286 – 292

R. Chattopadhyay, Application of Neural Network in yarn Manufacture, Indian Journal of fibre and Textile Research 31, ( 2006) 160 – 169, 60. 

Rawal, A (2006), A Modified Micro-Mechanical Model for the Prediction of Tensile Behavior of Nonwoven Structures, Journal of Industrial Textiles, Vol. 36, pp. 133-149.

S.M. Ishtiaque, A. Das, Prashant Vishnoi and S.N. Singh, Influence of Modified Transport Duct Profile on Air Flow, Yarn Structure and Properties : Part II - Journal of the Textile Institute, 2006, Vol 97, No. 5, Page-409-418.

S.M. Ishtiaque, A. Das, Prashant Vishnoi and S.N. Singh, Influence of Process Parameters on Air Speed In Transport Duct Of DREF-III Machine: Part-I – Journal of the Textile Institute, 2006, Vol 97, No. 5, Page-401-408.

A Das, S M Ishtiaque and Ritesh Niyogi, Optimization of Fiber Friction, Top Arm Pressure and Roller Setting at Various Drafting Stages, Textile Research Journal, 76(12), 913-921 (2006). 

Rawal, A. and Soukupova, V.(2006), Letter to the Editor, Comments on Effect of Abrasion and Absorbed Water on the Handle of Nonwovens for Disposable Diapers, Textile Research Journal, Vol. 76, pp. 343.

S.M. Ishtiaque, A. Das and Prashant Vishnoi, Influence of Process Parameters on Migrational Characteristics of Open-End and Core-Sheath Friction Spun Yarns - Journal of the Textile Institute, 2006, Vol 97, No. 3, Page-211-222

Rawal. A, and Gonsalves. J (2006), Rotational Effects of Polymeric Fluids on the Shape of Filaments in Melt Extruded Net Structures, Plastics, Rubber and Composites, Vol. 35, pp. 23-27.

Rawal, A. and Anandjiwala, R.D. (2006), Relationship between Process Parameters and Properties of Multifunctional Needlepunched Geotextiles, Journal of Industrial Textiles, Vol. 35, pp. 271-285.

Rawal, A. and Davies, P.J. (2006), Empirical Modelling of Filament Area in Melt Extruded Net Structures, Indian Journal of Fibre & Textile Research, Vol. 31, pp.241-247.

S.M. Ishtiaque, A. Das and Prashant Vishnoi, Twist Structural Characteristics of Friction Spun Yarns- Journal of the Textile Institute, 2005, Vol 96, No. 5, Page-339-348

R. Alagirusamy, V Ogale, A. Vaidya and P M V Subbarao “Effect of Jet Design on Commingling of Glass/Nylon Filaments” Journal of the Thermoplastic Composite Materials, Vol.18, May 2005, p255

R. Alagirusamy and Vinayak Ogale, “ Development and Characterization of GF/PET, GF/ Nylon, GF/PP Commingled Yarns for Thermoplastic Composites” Journal of the Thermoplastic Composite Materials, Vol.18, May 2005, p269

S M Ishtiaque, K R Salhotra , A Das and N S Sukhadeva, Study on Fibre Openness: Its Impact on Roving Drafting Force and Quality of Yarn – Indian Journal of Fibre and Textile Research, 30, March-2005, 26-31

S. Mukhopadhyay, B.L. Deopura and R. Alagirusasmy, “Drawing of Polypropylene Filaments on a Gradient Heater” Journal of Textile Insitute, Vol 96, No. 5, 2005, p349.

Rajni Singh, Astha Jain, Shikha Panwar, Deepti Gupta and SK Khare, Antimicrobial activity of some natural dyes, Dyes and Pigments

Deepti Gupta, Astha Jain and Shikha Panwar, Anti UV And Anti Microbial Properties Of some Natural Dyes on cotton, Indian Journal of Fibre Science and Technology, Vol.30, June 2005, 190-195

A. Das, A. Kothari and R. Sharma, Using Textile Fabrics as Electromagnetic Shields – Part II, Apparel Views, May 2005, Vol-IV(5), Page – 28 – 29

A. Das, A. Kothari and R. Sharma, Using Textile Fabrics as Electromagnetic Shields – Part I, Apparel Views, April 2005, Vol-IV (4), Page – 22 – 23 

A. Das, Comfort Characteristics of Fabrics Made of Specialty Yarns, Apparel Views, February 2005, Vol-IV.

A. Das, Comfort Characteristics of Fabrics Made of Specialty Yarns , Apparel Views, January 2005, Vol-IV, Page – 32-33

5. Saktivel C and S. Mukhopadhyay, "Some studies on Mudar Fibers spinning" Journal of Industrial Textiles, Sage Publications, London. Vol. 35, No. 1, 63-76 [July 2005]

Saktivel C and S. Mukhopadhyay, "Some studies on Mudar Fibers spinning" Journal of Industrial Textiles, Sage Publications, London. Vol. 35, No. 1, 63-76 [July 2005]

S. Mukhopadhyay and Saktivel C, "Advances in research on Spider Silk" accepted in Journal of Industrial Textiles, Sage Publications, London. Vol 35, No.2, 91 [Oct 2005]

Das, D. and Neckář, B., Yarn strength behavior at different gauge lengths, Indian Journal of Fiber and Textile Research 30, 414–420, 2005

Neckář, B. and Das, D. Autocorrelation function of yarn unevenness, Indian Journal of Fiber and Textile Research 30, 421–430, 2005

Das, D. and Neckář, B. A Methodology for better characterization of yarn strength, Melliand International 11, 104–106, 2005

Das, D., Yarn strength as a function of gauge length–a critical review, Vlakna a Textil (Fiber and Textile) 12, 7–12, 2005

Banerjee P K & Bhat Prabhakar, Torsional rigidity of cotton hosiery yarns , Ind. J. of Fibre & Text. Res., Vol. 30, June (2005) 136-141

S Ghosh, R Rosenthal, P Zajac, WP Weber, D Oertli, M Heberer, I Martin, GC Spagnoli, A Reschner, Culture of melanoma cells in three-dimensional architectures results in impaired immunorecognition by cytotoxic T lymphocytes specific for Melan-A /MART-1 tumor associated antigen, Annals of Surgery, 2005, 242(6):851-858 

S Ghosh, R Rosenthal, P Zajac, WP Weber, D Oertli, M Heberer, I Martin, GC Spagnoli, A Reschner, Culture of melanoma cells in three-dimensional architectures results in impaired immunorecognition by cytotoxic T lymphocytes specific for Melan-A /MART-1 tumor associated antigen, Annals of Surgery, 2005, 242(6):851-858 

S Ghosh, GC Spagnoli, I Martin, S Ploegert, P Demougin, M Heberer, A Reschner, Three-dimensional culture of melanoma cells profoundly affects gene expression profile: A high density oligonucleotide array study, Journal of Cellular Physiology, 2005 ; 204(2):522-531 

Click here for additional information

M Bolli, S Ghosh, GC Spagnoli, I Martin, S Ploegert, P Demougin, M Heberer, A Reschner, Culture of melanoma cells in three-dimensional architectures results in impaired immunorecognition by cytotoxic T lymphocytes specific for Melan-A/MART-1 tumor associated antigen, Journal of the American College of Surgeons, 2005, 201 (3): S79 

Ghosh, Anindya; Ishtiaque, S. M.; Rengasamy, R. S. Department of Textile Technology, Indian Institute of Technology Delhi, New Delhi, India. Textile Research Journal (2005), 75(10), 741-744.

Ghosh, Anindya; Ishtiaque, S. M.; Rengasamy, R. S. Department of Textile Technology, Indian Institute of Technology Delhi, New Delhi, India. Textile Research Journal (2005), 75(10), 731-740.

Rengasamy, R. S.; Ishtiaque, S. M.; Ghosh, Anindya. Department of Textile Technology, Indian Institute of Technology, New Delhi, India. Indian Journal of Fibre & Textile Research (2005), 30(3), 283-289.

P. Santhana Gopala Krishnan, Mangala Joshi, Prachur Bhargava, Suresh Valiyaveettil, and Chaobin He, Effect of Heterocyclic Based Organoclays on the Properties of Polyimide-Clay Nanocomposite, Journal of Nanosci. Nanotech., 5, 2005, 1136-1145 . 

R Purwar and M. Joshi, Effect of Microwave Curing on Easy Care Finishing of Cotton Using Glyoxal/Glycol, AATCC Review, 5(11) (November 2005) 40-43

Agrawal, A.V., S.M. Ishtiaque, and A. Nishkam, Study of arrangement of fibres in compact spun yarn and their impact on yarn quality. Resume of Papers - Joint Technological Conference, a joint publication of BTRA, NITRA , SITRA and ATIRA, 46th, Ahmedabad, India, Mar. 12-13, 2005, 2005: p. 57-61.

Mangala Joshi, Nanotechnology : Opportunities in Textiles , Report on one day seminar organized by Textile Deptt. IIT Delhi on 10th September 2005, Asian Dyer,Nov-Dec 2005,pg 63 

Mangala Joshi, S K Pal and Vikas Thakare, Polymer Clay Nanocomposites for Coated Textile Applications:A Perspective, Man Made Textiles In India ,December XLVII (12) (2005) 448-455.

Mangala Joshi, Nanotechnology : Opportunities in Textiles , Report on one day seminar organized by Textile Deptt. IIT Delhi on 10th September 2005, Indian Journal of Fiber and Textile Research, Vol. 30,December 2005, pg 477-479.

M. Joshi and GV Raghunath Reddy, UV Protective Textiles: Options and Opportunities, Asian Dyer, Sep -Oct 2005,76-81

Abhijit Majumdar, Prabal Kr. Majumdar & Bijan Sarkar, Application of linear regression, artificial neural network and neuro-fuzzy algorithms to predict the breaking elongation of rotor-spun yarns, Indian Journal of Fibre and Textile Research, 30, Pages 19-25, March 2005. 

Agrawal, A K; Jassal, M, Save, N S; Periyasamy, S; Gho;Sh, A K., Ramasubramani, K R T; Vishnoi, A; Palanikkumaran, M.; Gupta, K. K. Environmantally responsive smart textiles –I, Express Textile, 16-30 April 2005 

Agrawal, A K; Jassal, M, Save, N. S.; Periyasamy, S.; Ghosh, A K; Ramasubramani, K R T; Vishnoi, A; Palanikkumaran, M.; Gupta, K. K Environmantally responsive smart textiles-II Express Textile, 1-15 May 2005. 

Raju Seenivasan Rengasamy, Manjeet Jassal And Chidambaram Rameshkumar,Studies On Structure And Properties of Nephila-Spider Silk Dragline, AUTEX Research Journal, (2005), Vol. 5No1, March 

Save, N. S., Jassal, M., Agrawal, A. K., Stimuli Sensitive Copolymer Poly (N-tert-butylacrylamide-ran-acrylamide): Synthesis and Characterization, J of Applied Polymer Science,Vol 95 (3) (2005). 672-680

Joshi-P; Ishtiaque-SM; Jain-SK, Competitiveness of Indian clothing industry in WTO Era, Asian Text. J., 2005, 14(12), 68-77.

Rawal. A and Davies. P.J (2005), Expert System for the Optimisation of Melt Extruded Net Structures, Plastics, Rubber and Composites, Vol. 34, Issue No. 2, pp. 47-53. 

Rengasamy-RS; Ishtiaque-SM; Ghosh-A, Prediction of spun yarn strength at different gauge lengths using Weibull distribution, Indian J. Fibre Text. Res.. 2005, 30(3), 283-289.

Kumar-A; Nishkam-A; Ishtiaque-SM, Effect of inter-fibre friction on yarn quality, Indian J. Fibre Text. Res.. 2005, 30(2), 148-152.

Joshi-P; Ishtiaque-SM; Jain-SK, Indian textile and clothing industry prospects in post-quota era, Text. Magazine. 2005, 46(6), 72-76.

Ishtiaque-SM; Salhotra-KR; Das-A; Sukhadeva-NS, Study on fibre openness - Its impact on roving drafting force and yarn quality, Indian J. Fibre Text. Res.. 2005, 30(1), 26-31.

Ashwini K. Agrawal, Manjeet Jassal, Amrish Vishnoi, Ninad S. Save, Temperature Responsive Fibers with Anisotropic Transitional Behavior, Journal of Applied Polymer Science, 95 (2005) 681-688. 

Save, Ninad S.; Jassal, Manjeet; Agrawal, Ashwini K. Smart breathable fabric. Journal of Industrial Textiles (2005), 34(3), 139-155. 

Low salt dyeing of modified viscose rayon fibres with reactive dyes. Bairagi, Nilanjana; Gulrajani, M. L.; Deopura, B. L.Department of Textile Technology, Indian Institute of Technology, New Delhi, India. Editor(s): Jassal, Manjeet; Agrawal, Ashwini K. Emerging Trends in Polymers & Textiles, Proceedings of [the] International Conference, New Delhi, India, Jan. 7-8, 2005 (2005), 347-355. Publisher: Indian Institute of Technology Delhi, New Delhi, India.

Bairagi N, Gulrajani ML, Deopura BL, Shrivastava, A, Dyeing of N-modified viscose rayon fibres with II) acid and metal complex dyes 121(2005) 320-324e dyes, Coloration Technology, 121 (2005) 320-4.

Bairagi N, Gulrajani ML, Deopura BL, Shrivastava, A, Dyeing of N-modified viscose rayon fibres with reactive dyes, Coloration Technology, 121, (2005) 113-120.

A. Chatterjee and B. L. Deopura, High Modulus/Tenacity filaments from Blends of Different Molecular Weights of Polypropylene J. Appl. Polym. Sci. 96, (2005) 1021-1028.

Abhijit Majumdar, Bijan Sarkar & Prabal Kr. Majumdar, Determination of quality value of cotton fibre using hybrid AHP-TOPSIS method of multi-criteria decision-making, Journal of the Textile Institute, 2005, No 5, Pages 303-309.

17. Bhanu Nandan, C.-H. Lee, H.-L. Chen, W.-C. Chen, Molecular Architecture Effect on the Microphase Separations in Supramolecular Comb-Coil Complexes of Polystyrene-block-Poly(2-vinyl pyridine) with Dodecyl benzene Sulfonic acid: (AB)n(A)n Block-Arm Star Copolymer, Macromolecules 38, 10117, 2005.

16. J.-Y. Hsu, Bhanu Nandan, M.-C. Chen, F.-C. Chiu, H.-L. Chen, Correlation between Crystallization Kinetics and Melt Phase Behavior of Crystalline-Amorphous Block Copolymer/Homopolymer Blends, Polymer 46, 11837, 2005.

Abhijit Majumdar, Prabal Kr. Majumdar & Bijan Sarkar, Determination of Technological Value of Cotton Fibre: A comparative study between traditional and multiple criteria decision making approach, Autex Research Journal, June 2005, Pages 71-80.

Abhijit Majumdar, Prabal Kr. Majumdar & Bijan Sarkar , Application of Adaptive Neuro-Fuzzy System for the Prediction of Cotton Yarn Strength from HVI fibre properties, Journal of the Textile Institute, 2005, No 1, Pages 55-60. 

Ghosh-A; Ishtiaque-SM; Rengasamy-RS, Stress-strain characteristics of different spun yarns as a function of strain rate and gauge length, J. Text. Inst.. 2005, 96(2), 99-104.

Joshi-P; Ishtiaque-SM; Jain-SK, The preparedness of India's textile and clothing industry for the post-quota era, Textile Asia. 2005, 36(4), 59-62.

Rawal. A, Potluri, P. and Steele, C. (2005), Geometrical Modeling of the Yarn Paths in 3-Dimensional Braided Structures, Journal of Industrial Textiles, Vol. 35, pp.115-135. 

Subrata Das, R. Chattopadhayay, M.L. Gulrajni and Kushal Sen, Study of property & structural variants of mulberry and tasar silk filaments, Autex Research Journal, Vol5, No.2 (2005) P- 81 – 86

R. Chattopadhyay, Wicking behaviour of compact and ring spun yarns and fabrics, Melliand International, Vol. 11, March 2005, 25 – 30 

A. Das, V. K. Kothari and D. Mane, Frictional Characteristics of Woven and Nonwoven Wipes – Fibers and Polymers, 6(4) 318-321 (2005)

A. Das, V. K. Kothari, A. Kumar and M. S. Mehta, Study on Anisotropic Creep Behavior of Nonwoven Geotextiles- Fibres and Polymers ,6(4), 313-317 (2005)

Prashant Vishnoi, S.M. Ishtiaque and A. Das, Effect of Opening Roller Speed, Drums Speed Difference and Suction Air Pressure on Properties of Open-End Friction Spun Polyester and Acrylic Yarns - Fibers and Polymers, 6(3) 250-258 (2005)

A Das, S M Ishtiaque & J. Parida, Effect of Fiber Friction, Yarn Twist and Splicing Air Pressure on Yarn Splicing Performance – Fibers and Polymers, 6(1) 72-78 (2005)

A. Das, V. K. Kothari and V. Nagaraju, A Study on Frictional Characteristics of Woven Fabrics – AUTEX Research Journal, Vol 5, No. 3, September 2005, 133-140

S. M. Ishtiaque and A. Das, End Breakage in Rotor Spinning: Effect of Different Variables on Cotton Yarn End Breakage – AUTEX Research Journal, Vol 4, No. 2, June 2004, 52-59

A Das, S M Ishtiaque and V. Nagaraju, Study on Splicing Performance of Different Types of Staple Yarns – Fibers and Polymers, 5(3) 204-208 (2004)

A. Das, S. M. Ishtiaque and P. Yadav, Contribution of Core and Sheath Components in the Tensile Properties of DREF-III Yarn – Textile Res. J., 74(2), 134-139 (2004).

A Das and S M Ishtiaque, Comfort Characteristics of Fabrics Containing Twist-Less and Hollow Fibrous Assemblies in Weft – Journal of Textile and Apparel, Technology and Management Vol. 3, Issue 4, Winter 2004, pp. 1-7. 

S M Ishtiaque and A Das, Study on Thermal Treatment of Hybrid Technical Yarns, Fibers and Polymers, 5(1) 25-30 (2004)

Vinay Kumar Midha, R. Alagirusamy and V K Kothari “Studies on Thermal Properties of Hollow Polyester Needle Punched Blankets” Asian Textile Journal, January 2004, p65.

R. Alagirusamy and Vinayak Ogale “Commingled and Air Jet-textured Hybrid Yarns for Thermoplastic Composites”, Journal of Industrial Textiles, Vol 33, Issue 4, April 2004, p223.

A Das, S M Ishtiaque and R Kumar, Study on Drafting Force of Roving: Part IV – Correlation Between Drafting Force, Roving Strength and Yarn Quality – Indian Journal Of Fibre and Textile Research, 29, September-2004, 313-317

A Das, S M Ishtiaque and R Kumar, Study on Drafting Force of Roving: Part III – Effect of Process Parameters and Roving Irregularity on Drafting Force Variability – Indian Journal of Fibre and Textile Research, 29, September-2004, 308-312

A Das, S M Ishtiaque and R Kumar, Study on Drafting Force of Roving: Part II – Effect of Material Variables – Indian Journal of Fibre and Textile Research, 29, June-2004, 179-183

A Das, S M Ishtiaque and R Kumar, Study on Drafting Force of Roving: Part I – Effect Of Process Variables – Indian Journal of Fibre and Textile Research, 29, June-2004, 173-178

Deepti Gupta, Sudhir K Khare and Ankur Laha, Antimicrobial properties of natural dyes against Gram-negative bacteria, Coloration Technology, 120, 2004, 167-171

Gupta D and Gangadhar B R, A Statistical Model For Developing Body Size Charts For Garments, Int. Jour. Clothing Science and Technology, Vol.16 (5) 2004, 458-469

Deepti Gupta, ML Gulrajani and Shipra Kumari, Light fastness of naturally occurring anthraquinone dyes on nylon, Coloration Technology , 120 (2004), 205-212

Studies on Nonisothermal Crystallization of HDPE/POSS Nanocomposites, Polymer, 45(14), 4953-4968

Polymeric Nanocomposites-Polyhedral Oligomeric Silsesquioxanes (POSS) as Hybrid Nanofiller, Journal of Macromolecular Sciences Part C- Polymer Reviews, 44(4), 389-410

Jassal, Manjeet. ; Synthesis and characterization of sodium acrylate and 2-acrylamido-2-methylpropane sulphonate (AMPS) copolymer gels.India. Fibers and Polymers (2004), 5(2), 95-104 

Click here for additional information

S. M. Ishtiaque and A. Das, Spinning Solutions: A Critical Approach, Asian Textile Journal, March 2004, 71-77

Das, D., Ishtiaque S. M., Mac, T., Veit, D., and Thomas, G., Application of artificial neural network for prediction of rotor-spun yarn properties, Melliand International 10, 183–185, 2004

Das, D., Ishtiaque S. M., Mac, T., Veit, D., and Thomas, G., Evaluation of the best method of fiber blending on Uster MDTA 3, Melliand International 10 (2), 110–113, 2004

Das, D., Raw material characteristics vis-à-vis rotor spinning technology: a review, Vlakna a Textil (Fiber and Textile) 11, 94–98, 2004

M. Joshi, M. Shaw and B. S. Butola, Studies on Composite Filaments from Nanoclay Reinforced Polypropylene, Fibres and Polymers, (Korea), 5(1) 2004, 1-9. 

M Joshi and R Purwar, Recent Developments in Antimicrobial Finishing of Textiles- A Review, AATCC Review, Vol. 4(3), March 2004, pg 22. 

M Joshi and R Purwar ,A review of developments in new processes for colour removal from textile effluents, Review of Progress in Colouration, 34(2004)58-71

M Joshi, R Bansal and R Purwar, Colour Removal from Textile Effluents: A Review, Indian Journal of Fibre and Textile Research, 29 (2004) 239-259. 

Abhijit Majumdar Prabal Kr. Majumdar & Bijan Sarkar, Selection of cotton bales by spinning consistency index and micronaire using artificial neural networks, Autex Research Journal, Vol 4, No 1, Pages 1-8, January 2004.

Manjeet Jassal, Amit Khungar, Pushpa Bajaj and T.J.M. Sinha, Waterproof - Breathable Polymeric Coatings based on polyurethanes, Journal of Industrial Textiles, 33 (2004) 269.

Rengasamy-RS; Ishtiaque-SM; Ghosh-A; Patnaik-A; Bharati-M, Analysis of spinning tension in ring spinning, Indian J. Fibre Text. Res.. 2004, 29(4), 440-442.

Das-A; Ishtiaque-SM; Kumar-R, Study on drafting force of roving: Part IV - Correlation between drafting force, roving strength and yarn quality, Indian J. Fibre Text. Res.. 2004, 29(3), 313-317.

Das-A; Ishtiaque-SM, Kumar-R, Study on drafting force of roving: Part III - Effect of process parameters and roving irregularity on drafting force variability, Indian J. Fibre Text. Res.. 2004, 29(3), 308-312.

Ishtiaque-SM; Rengasamy-RS; Ghosh-A, Optimization of ring frame process parameters for better yarn quality and production, Indian J. Fibre Text. Res.. 2004, 29(2), 190-195.

Das-A; Ishtiaque-SM; Kumar-R,, Study on drafting force of roving: Part II - Effect of material variables, Indian J. Fibre Text. Res.. 2004, 29(2), 179-183.

Das-A; Ishtiaque-SM; Kumar-R, Study on drafting force of roving: Part I - Effect of process variables, Indian J. Fibre Text. Res.. 2004, 29(2), 173-178.

Ishtiaque-SM; Rengasamy-RS; Ghosh-A, Optimization of speed frame process parameters for better yarn quality and production, Indian J. Fibre Text. Res.. 2004, 29(1), 39-43.

Kothari-VK; Ishtiaque-SM; Ogale-VG, Hairiness properties of polyester-cotton blended yarns, Indian J. Fibre Text. Res.. 2004, 29(1), 30-34.

S. Mukhopadhyay, B.L. Deopura and R. Alagirusamy, Production and Properties of High-modulus-High-tenacity Polypropylene Filaments, Journal of Industrial Textiles, 33, (2004)245-254.

Ghosh-A; Ishtiaque-SM; Rengasamy-RS; Mal-P; Patnaik-A , Spun yarn strength as a function of gauge length and extension rate: A critical review, J. of Text. and Apparel,Tech. and Management, 2004, 4

15. Bhanu Nandan, H.-L. Chen, C.-S. Liao, S.-A. Chen, Self-Assembly and Crystallization in a Supramolecular Hairy Rod Polymer from the complex of Polyaniline with -Methoxy Poly(ethylene oxide) Phosphates, Macromolecules 37, 9561, 2004.

14. Y.-Y. Huang, Bhanu Nandan, H.-L. Chen, C.-S. Liao, U. Jeng, Cocrystallization Behavior in Binary Blend of Crystalline-Amorphous Diblock Copolymers, Macromolecules 37, 8175, 2004 (Communication to the Editor).

Abhijit Majumdar, Bijan Sarkar & Prabal Kr. Majumdar, Application of Analytic Hierarchy Process for the Selection of Cotton Fibers, Fibers and Polymers, December 2004, Pages 297-302. 

13. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Poly(ether ether ketone)/Poly(aryl ether sulphone) Blends: Melt Rheological Behavior, Journal of Polymer Science, Polymer Physics Edition 42, 1548, 2004.

Abhijit Majumdar & Prabal Kr. Majumdar, Prediction of ring spun cotton yarn elongation using mathematical, statistical and artificial neural network models, Textile Research Journal, July 2004, Pages 652-655.

12. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Acrylonitrile-Butadiene-Styrene / Poly(ether ether ketone) Blends : An Attempt Towards a Polymer Reinforced Polymer Composite, Macromolecular Materials and Engineering 289, 749, 2004.

Abhijit Majumdar , Prabal Kr. Majumdar & Bijan Sarkar, Prediction of single yarn tenacity of ring and rotor spun yarns from the HVI results using artificial neural networks, Indian Journal of Fibre and Textile Research, Vol. 29, June 2004, Pages 157-162.

Das-D; Ishtiaque-SM; Mac-T; Veit-D; Gries-T, A quick, reliable, and economic method for evaluating the properties of rotor-spun yarn, Autex Res. J.. 2004, 4(3), 123-128.

Das-D; Ishtiaque-SM; Mac-T; Veit-D; Gries-T, Application of artificial neural network to predict rotor-spun yarn properties, Melliand Int.. 2004, 10(3), 183-185.

Das-D; Ishtiaque-SM; Mac-T; Veit-D; Gries-T, Evaluation of the best method for fiber blending on Uster MDTA 3, Melliand Int.. 2004, 10(2), 110-113.

S. Dhamija, S. Sambari and R. Chattopadhyay, Migratory behaviour of core and sheath fibres in dref-III friction spun acrylic yarns, Indian Journal of fibre and Textile Research 29, ( 2004) 290 – 298

.R. Chattopadhyay , Anirban Guha & Jayadeva “ Performance of Neural Networks for predicting yarn properties using principal component analysis” Journal of Applied Polymer Science, Vol 91 ( 2004) 1746 – 1751

R. Chattopadhyay , Anirban Guha & Jayadeva “ Performance of Neural Networks for predicting yarn properties using principal component analysis” Journal of Applied Polymer Science, Vol 91 ( 2004) 1746 – 1751

R.S. Rengasamy, V.K. Kothari, R. Alagirusamy and S. Modi “Studies on Air-Jet Textured Sewing Threads” Indian Journal of Fibre & Textile Research, Vol.28, September 2003, pp281.

S. M. Ishtiaque, A. Das and S. Chaudhari, Study on the Influence of Fibre Openness on Processibility of Cotton and Yarn Quality: Part II – Effect Of Carding Parameters - Indian Journal of Fibre and Textile Research, December-2003, 405-410.

S. M. Ishtiaque, A. Das and S. Chaudhari, Study on the Influence of Fibre Openness on Processibility of Cotton and Yarn Quality: Part I – Effect of Blow Room Parameters – Indian Journal of Fibre and Textile Research, December-2003, 399-404.

A. Das, S. M. Ishtiaque and P. Yadav, Influence of Thermal Treatment on the Properties of Friction-Spun Core Yarns – Indian Journal of Fibre and Textile Research, September 2003, 295-300 

A. Das, S. M. Ishtiaque and P. Yadav, Properties of Woven Fabrics Containing Core-Sheath DREF-III Yarn in Weft – Indian Journal of Fibre and Textile Research, September 2003, 260-264 

A. Das, S. M. Ishtiaque and P. Yadav, Apron Slippage in Ring Frame: Part III – Design and Development of Anti-Slip Apron for Improved Yarn Quality – Indian Journal of Fibre and Textile Research, March 2003, 114-116

S. M. Ishtiaque and A. Das, Characterisation of Grey and Dyed Cotton Fibres and Waste at Different Stages of Rotor Spinning Process – Indian Journal Of Fibre And Textile Research, March 2003, 65-70.

S. M. Ishtiaque, A. Das, V. Sharma and A. K. Jain, Evaluation of Fabric Hand by Extraction Method - Indian Journal of Fibre and Textile Research, June 2003, 197-201

S. M. Ishtiaque and A. Das, Influence of Moisture Content and Linear Density of Feed Sliver on Running Performance and Yarn Quality During Rotor Spinning of Dyed Cotton – Indian Journal of Fibre and Textile Research, June 2003, 177-181 

ML Gulrajani, Deepti Gupta and Priyanka Gupta, Application of natural dyes on bleached coir yarn, Indian Journal of Fibre Science and Technology, Vol.28, Dec.2003, pp 466-470

Sanjay Gupta and Deepti Gupta, Creatively engineered sportswear fabrics, ATA Journal, Aug-Sep. 2003, pp 82-83

Jassal, Manjeet; Synthesis, characterization, and rheological studies of methacrylic acid-ethyl acrylate-diallyl phthalate copolymers.India. Journal of Applied Polymer Science (2003), 89(5), 1430-1441 

Click here for additional information

Ray S C & Banerjee P K, Mechanics of 1x1 rib loop formation on a dial and cylinder machine: Part I - Modeling of the 1x1 rib loop formation process, Ind. J. of Fibre & Text. Res., Vol 28, June (2003) 185-196

Ray S C & Banerjee P K, Mechanics of 1x1 rib loop formation on a dial and cylinder machine: Part II - Measurement of cam force , Ind. J. of Fibre & Text. Res., Vol 28, Sept. (2003) 239-245

Ray S C & Banerjee P K, Mechanics of 1x1 rib loop formation on a dial and cylinder machine: Part III - Validation of the model, Ind. J. of Fib. & Text. Res., Vol28, Sept. (2003) 246-259

Banerjee, S., Das, D., Bodhak, T. K., and Chandra, A., Influence of drawing parameters on the quality of single worsted yarn, and Man Made Textiles in India 43, 170–173, 2003

Agrawal, A. V.; Tiwari, M. M.; Ishtiaque, S. M.; Nishkam, A. Resume of Papers - Joint Technological Conference, a joint publication by ATIRA, BTRA, NITRA & SITRA, 44th, Coimbatore, India, Mar. 8-9, 2003 2003, 129-136.

Ishtiaque, S.M., K.R. Salhotra, and A. Kumar, Compact spinning. A comprehensive review. Asian Textile Journal (Mumbai, India), 2003. 12(12): p. 74-82.

Save, Ninad S.; Jassal, Manjeet; Agrawal, Ashwini K., Stimuli Sensitive Copolymer Poly (N-tert-butylacrylamide-ran-acrylamide): Processing into thin films and their transitional behaviour, 44 (2003) 7979-7988.

Jassal, Manjeet; Acharya, Badri Narayan; Bajaj, Pushpa. Synthesis, characterization and rheological studies of methacrylic acid-ethyl acrylate-diallyl phthalate copolymers, Journal of Applied Polymer Science (2003), 89(5), 1430-1441. 

Ishtiaque-SM; Chaudhuri-S; Das-A, Influence of fibre openness on processibility of cotton and yarn quality: Part II - Effect of carding parameters, Indian J. Fibre Text. Res.. 2003, 28(4), 405-410.

Ishtiaque-SM; Chaudhuri-S; Das-A, Influence of fibre openness on processibility of cotton and yarn quality: Part I - Effect of blow room parameters, Indian J. Fibre Text. Res.. 2003, 28(4), 399-404.

Ishtiaque-SM; Das-A; Yadav-P, Influence of thermal treatment on properties of friction-spun core yarns, Indian J. Fibre Text. Res.. 2003, 28(3), 295-300.

Ishtiaque-SM; Das-A; Yadav-P, Properties of woven fabrics containing core-sheath DREF-III yarn in weft, Indian J. Fibre Text. Res.. 2003, 28(3), 260-264.

Ishtiaque-SM; Das-A; Sharma-V; Jain-AK, Evaluation of fabric hand by extraction method, Indian J. Fibre Text. Res.. 2003, 28(2), 197-201.

Ishtiaque-SM; Das-A, Influence of moisture content and linear density of feed sliver on running performance and yarn quality during rotor spinning of dyed cotton, Indian J. Fibre Text. Res.. 2003, 28(2), 177-181.

Ishtiaque-SM; Das-A; Yadav-P, Apron slippage in ring frame: Part III - Design and development of anti-slip apron for improved yarn quality, Indian J. Fibre Text. Res.. 2003, 28(1), 114-116.

Ishtiaque-SM; Das-A, Characterization of grey and dyed cotton fibres as well as waste at different stages of rotor spinning process, Indian J. Fibre Text. Res.. 2003, 28(1), 65-70.

Samrat Mukhapadhyay, B L Deopura and R Alagirusamy, Interphase Behavior in Polypropylene Composites, Journal of Thermoplastics Composites 16, (2003) 479-496.

11. T.H. Goswami, Bhanu Nandan, S. Alam, G.N. Mathur, A Selective Reaction of Polyhydroxy Fullerene with Cycloaliphatic Epoxy Resin in Designing Ether Connected Epoxy Star Utilizing Fullerene as a Molecular Core, Polymer 44, 3209, 2003.

10. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Glass Transition Behaviour of Poly(ether ether Ketone)/Poly(aryl ether sulphone) blends : Dynamic Mechanical and Dielectric Relaxation Studies, Polymer 44, 1267, 2003.

9. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Poly(ether ether ketone)/Poly(aryl ether sulphone) Blends: Crystallization and Melting Behaviour, Journal of Applied Polymer Science 90, 2906, 2003.

8. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Poly(ether ether ketone)/Poly(aryl ether sulphone) Blends: Morphology-Mechanical Properties Relationships, Journal of Applied Polymer Science 90, 2887, 2003.

Abhijit Majumdar & Rajarshi Sengupta, Effect of extension rate and specimen length on tenacity and breaking extension of polyester/ viscose rayon twin spun air-jet yarns, Indian Journal of Fibre and Textile Research, June 2003, Pages 182-184.

7. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Poly(ether ether ketone)/Poly(aryl ether sulphone) blends: Thermal Degradation Behaviour, European Polymer Journal 39, 193, 2003.

6. D.S. Bag, Bhanu Nandan, S. Alam, L.D. Kandpal, G.N. Mathur, Density Measurements of Plastics – A Simple Standard Test Method, Indian Journal of Chemical Technology 10, 561, 2003.

Ishtiaque-SM; Salhotra-KR; Kumar-A, Compact spinning a comprehensive review, Asian Text. J.. 2003, 12(11-12), 74-82.

Salhotra-KR; Ishtiaque-SM; Kumar-A, Compact spinning, a comprehensive survey, Textile Asia. 2003, 34(11), 34-41.

Potluri. P., Rawal. A, Rivaldi. M, Porat. I.(2003), Geometrical modeling and control of a triaxial braiding machine for producing 3D performs, Composites: Part A Vol. 34, pp. 481-492.

R. Chattopadhyay and R. Ghosh, Some studies on mass distribution profile of detached fringe in a comber, accepted for publication in “, Indian Journal of fibre and Textile Research 28, ( 2003) 393 - 398 

Chandrashekhar Chiplunkar, S.G. Deshmukh, R. Chattopadhyay, “Application of principles of event related open systems to business process reengineering” Computers & Industrial Engineering45,(2003) 347 – 374 

R. Chattopadhyay and A. K. Chakravarty, “ Influence of sheath core fibre characteristics on the properties of dref-3 friction yarns, Indian Journal of fibre and Textile Research, Vol 28, (2003) 150 - 156 

K. R. Salhotra,R. Chattopadhyay, S Dhamija and RCD Kaushik, Twist structure of friction spun yarns: Part -II - Core spun Dref - II yarns “,Indian Journal of fibre and Textile Research, Vol 28, (2003) 16 - 22,. 

Ankush Mattu, Anurag Jain, R. Alagirusamy and B.L. Deopura "Improved Thermal Bonding Behaviour of Polypropylene Non-wovens by Blending Different Molecular Weights of PP" Fibres and Polymers, Vol.3, No.1, March, 2002.

S. M. Ishtiaque and A. Das, Study on Rotor Deposition: Part II – Influence on Quality and Running Performance of Fibre Dyed Cotton Yarn – Indian Journal of Fibre and Textile Research, December 2002, 381-387.

S. M. Ishtiaque and A. Das, Study on Rotor Deposition: Part I – Influence on Quality and Running Performance of Grey Cotton Yarn – Indian Journal of Fibre and Textile Research, December 2002, 376-380.

J. V. Rao and A. Das, Forty-Third Joint Technological Conference Of ATIRA, BTRA, SITRA And NITRA - Indian Journal Of Fibre And Textile Research, September-2002, 323-325.

A. Das, S. M. Ishtiaque and P. Yadav, Apron Slippage in Ring Frame : Part II – Factors Affecting Apron Slippage and their Effect on Yarn Quality - Indian Journal of Fibre and Textile Research, June 2002, 135-141

A. Das, S. M. Ishtiaque and P. Yadav , Apron Slippage in Ring Frame : Part I - Establishing the Phenomenon and Its Impact on Yarn Quality – Indian Journal of Fibre and Textile Research, March 2002, 38-43.

Jassal, Manjeet.; Acrylic-based thickeners for pigment printing - a review. Journal of Macromolecular Science, Polymer Reviews (2002), C42(1), 1-34.

Click here for additional information

Jassal, M.;Aramid fibres - an overview.Indian Journal of Fibre & Textile Research (2002), 27(3), 290-306 

Click here for additional information

Sanjay Gupta and Deepti Gupta, Convergence-keyword for CAD/CAM�, ATA -Journal, 2002, 13(2). 53-54

J. V. Rao and A. Das, Forty-Third Joint Technological Conference: An Overview – Colourage, May 2002, 83-95

A. Das and Indu Bidani, How to be Competitive in the Global Textile Trade : IT The Best Tool – Indian Textile Journal -2002

Deepti Gupta, Mass customization: the way forward for the Indian Garment Industry, Clothesline, July 2002, pp 85-90

Banerjee P K, Chattopadhyay R S & Guha A, Investigations into homogeneity of coir fibres, Ind. J. of Fibre & Text. Res., Vol 27, June (2002), 111-116

Chatterjy B & Banerjee P K, The Geometry of 2x2 Matt weave, Part I - Development of the model, J. Text. Inst., Vol 93 No 4 Part I (2002) 386-397

Chatterjy B & Banerjee P K, The Geometry of 2x2 Matt weave, Part II - Validation of theoritical models, J. Text. Inst., Vol 93 No 4 Part II (2002) 398-408

S Ghosh, M Jassal, Use of Polysaccharide fibres in wound dressing, Indian Journal of Fibre & Textile Research , 2002, 27(4), 434-450 

M Jassal, S Ghosh, Aramid Fibres : an over view- Indian Journal of Fibre & Textile Research , 2002, 27(3), 290-306 

Dash, J.R., S.M. Ishtiaque, and R. Alagirusamy, Properties and processibility of compact yarns. Indian Journal of Fibre & Textile Research, 2002. 27(4): p. 362-368.

Gowda, R.V.M., S.M. Ishtiaque, and K.R. Salhotra, Influence of frictional characteristics of core and sheath on twist structure and tensile properties of DREF-3 friction spun yarns Part II: staple-core DREF-3 friction spun yarns. Journal of the Textile Institute, Part 1 Fibre Science and Textile Technology, 2002. 93(2): p. 153-161.

Gowda, R.V.M., K.R. Salhotra, and S.M. Ishtiaque, Influence of frictional characteristics of core and sheath on twist structure and tensile properties of DREF-3 friction spun yarns Part I: filament-core DREF-3 friction spun yarns. Journal of the Textile Institute, Part 1 Fibre Science and Textile Technology, 2002. 93(2): p. 137-152.

Ishtiaque, S.M., K.R. Salhotra, and R.V.M. Gowda, Influence of filament core surface structure on tensile properties of DREF-3 yams. Indian Journal of Fibre & Textile Research, 2002. 27(1): p. 18-24.

Kothari, V.K., S.M. Ishtiaque, and V.G. Ogale, Tensile properties of polyester/cotton blended yarns. Indian Journal of Fibre & Textile Research, 2002. 27(1): p. 48-51.

Salhotra, K.R., R.V.M. Gowda, and S.M. Ishtiaque, Influence of some test parameters on friction in acrylic fibres. Indian Journal of Fibre & Textile Research, 2002. 27(2): p. 117-121.

Salhotra, K.R., S.M. Ishtiaque, and R.V.M. Gowda, Influence of frictional characteristics of core and sheath in relation with core-sheath ratio and spinning drums' speed on tensile characteristics of DREF-3 friction-spun yarns. Indian Journal of Fibre & Textile Research, 2002. 27(3): p. 230-235.

Tyagi, G.K., A. Patnaik, and S.M. Ishtiaque, Influence of process parameters on flexural rigidity and elastic recovery of polyester OE rotor-spun yarns. Indian Journal of Fibre & Textile Research, 2002. 27(1): p. 44-47.

Tyagi, G.K., A. Saini, A. Tyagi, M. Khandelwal, and S.M. Ishtiaque, Influence of fibre cross-sectional shape on dye uptake and mechanical properties of polyester OE rotor-spun yams. Indian Journal of Fibre & Textile Research, 2002. 27(1): p. 11-17.

Ishtiaque, S.M., Das, A. and Yadav, P. Apron Slippage in Ring Frame: Part I - Establishing the Phenomenon and Its Impact on Yarn Quality – IJFTR, March 2002, 38-43.

Ishtiaque, S.M., Das, A. and Yadav, Apron Slippage in Ring Frame: Part II – Factors Affecting Apron Slippage and Their Effect on Yarn Quality - IJFTR, June 2002, 135-141

Ishtiaque, S.M. and Das, A., Study on Rotor Deposition: Part I – Influence on Quality and Running Performance of Grey Cotton Yarn – IJFTR, December 2002, 376-380.

Ishtiaque, S.M. and Das, A., Study on Rotor Deposition: Part II – Influence on Quality and Running Performance of Fibre Dyed Cotton Yarn – IJFTR, December 2002, 381-387.

Save, Ninad S.; Jassal, Manjeet; Agrawal, Ashwini K., Polyacrylamide based breathable coating for cotton fabric, Journal of Industrial Textiles (2002), 32(2), 119-138. 

Ghosh, S.; Jassal, M., Use of polysaccharide fibres for modern wound dressings, Indian Journal of Fibre & Textile Research (2002), 27(4), 434-450. 

Jassal, M.; Ghosh, S., Aramid fibres - an overview, Indian Journal of Fibre & Textile Research (2002), 27(3), 290-306.

Jassal, Manjeet; Acharya, Badri Narayan; Bajaj, P.; Chavan, R. B., Acrylic-based thickeners for pigment printing - a review, Journal of Macromolecular Science, Polymer Reviews (2002), C42 (1), 1-34.

Jassal, Manjeet; Acharya, Badri Narayan; Bajaj, P.; Chavan, R. B. Acrylic-based thickeners for pigment printing - a review. Journal of Macromolecular Science, Polymer Reviews (2002), C42(1), 1-34. 

Tyagi-GK; Patnaik-A; Goyal-A; Salhotra-KR; Ishtiaque-SM, Structure and properties of polyester MJS plied yarns, Indian J. Fibre Text. Res.. 2002, 27(3), 236-241.

5. Bhanu Nandan, L.D. Kandpal, G.N. Mathur, Poly(ether ether ketone)/Poly(aryl ether sulphone) blends: Thermal and Compatibility Aspects, Journal of Polymer Science, Polymer Physics Edition 40, 1407, 2002.

P.K.Banerjee and R.Chattopadhyay and,A.Guha ,"An Investigation on homogeneity of Coir Fibres", Indian Journal of Fibre and Textile research , 27, (2002) 111 -116

Deepti Gupta, Shipra Kumari and M. L. Gulrajani, Dyeing studies with hydroxy anthraquinones extracted from Indian madder (Rubia cordifolia) Part 1. Dyeing of nylon with Purpurin (1, 2, 4-trihydroxy anthraquinone), Coloration Technology, 117 (2001), 328-332

Deepti Gupta, Shipra Kumari and M. L. Gulrajani, Dyeing studies with hydroxy anthraquinones extracted from Indian madder (Rubia cordifolia) Part 2. Dyeing of nylon and polyester with nordamncanthal (1,3 - dihydroxy-2 – formyl anthraquinone), Coloration Technology , 117 (2001), 333-336

Jassal, M.; Developments in acrylic-based thickeners as substitute of emulsion thickeners for pigment printing. Indian Journal of Fibre & Textile Research (2001), 26(1 & 2), 143-155. 

Click here for additional information

Deepti Gupta, Biotechnology applications in textiles, Indian Journal of Fibre Science and Technology , Vol.26, March-June 2001,p206-213

Sanjay Gupta and Deepti Gupta, Finishing the microbial attack, ATA Journal, Hong Kong, Aug-Sept. 2001. 92-95

Deepti Gupta & Sanjay Gupta, Non conventional applications of biotechnology in textile industry, ATA Journal, Feb/Mar 2001,p46-48

A. Das and Indu Bidani, CAD to Sharpen Competitive Edge in Garment Designing – Indian Textile Journal, February-2001

Salhotra K R, Banerjee P K & Gowda R V M, A comparative study on the quality of Acrysorb & cotton Terrysock fabrics produced from ring, rotor & Dref-3 yarns, Ind. J. of Fibre & Text. Res., Vol. 26 March (2001) 214-222

Banerjee P K, Development of Textile Products for protection and enhancement of environment, Ind.J. of Fibre & Text. Res., Vol 26, March (2001), 214-222

M. Joshi, A. K. Mukherjee and B. D. Thakur, Development of a new styrene copolymer membrane for recycling of Polyester fibre dyeing effluent, J. Memb. Sci., 486(2001) pg 1-18 

Salhotra, K.R., S.M. Ishtiaque, and A. Kumar, A comparative study of MTS and equivalent MJS yarns. Indian Journal of Fibre & Textile Research, 2001. 26(4): p. 366-371.

M. Joshi,Environmental Management Systems for the textile industry: A Case Study, Indian J. of Fibre & Textile Research, Vol. 26, March -June 2001 Pg 33-38 

Jassal, M.; Bajaj, P., Developments in acrylic-based thickeners as substitute of emulsion thickeners for pigment printing, Indian Journal of Fibre & Textile Research (2001), 26(1 & 2), 143-155.

Jassal, M.; Bajaj, P. Developments in acrylic-based thickeners as substitute of emulsion thickeners for pigment printing. Indian Journal of Fibre & Textile Research (2001), 26(1 & 2), 143-155. 

Abhijit Majumdar, Assessment of tensile properties of cotton yarns, Indian Journal of Fibre and Textile Research, December 2001, Pages 354-357.

4. Bhanu Nandan, B. Lal, K.N. Pandey, S. Alam, L.D. Kandpal, G.N. Mathur, Thermal and Morphological Properties of Poly(ether ether ketone)/Poly(ether ketone) Blends, European Polymer Journal 37, 2147, 2001.

3. Bhanu Nandan, K.N. Pandey, G.D. Pandey, A. Singh, L.D. Kandpal, G.N.Mathur, Miscibility Behaviour of Poly(ether sulphone)/Nylon-6 Blends, Journal of Thermal Analysis and Calorimetry 64, 529, 2001.

2. Bhanu Nandan, B. Lal, K.N. Pandey, S. Alam, L.D. Kandpal, G.N. Mathur, Thermal and Morphological Properties of Nylon-6/PEEK blends, Journal of Polymer Materials 18, 355, 2001.

1. Bhanu Nandan, B. Lal, K.N. Pandey, S. Alam, L.D. Kandpal, G.N. Mathur, Studies on High Performance PEEK/Alumina Composites, Journal of Polymer Materials 18, 135, 2001.

Anirban Guha, R. Chattopadhyay and Jayadeva, Predicting Yarn Tenacity: A comparision of mechanistic, statistical and neural network models, Journal of textile Institute, Vol 92, Part1, No. 2, (2001) 139 - 145 

C. Chiplunkar, R. Chattopadhyay and S. G. Deshmukh " Developments of an integrated information management model: a case of textile industry, Production Planning and Control, Vol 12, No.6, 629- 645, 2001 

Rajiv Kumar, R. Chattopadhyay and I. C. Sharma, “ Production of silk and silk- polyester blended uyarns on cotton system, Textile Asia, March, ( 2001) 32 – 34 

. R. Chattopadhyay, K. R. Salhotra, , S. Dhamija and R. C. D. Kaushik, Core coverage in Dref-III friction – spun yarns,” Indian Journal of Fibre and Textile research , 26, (2001) 387 -391

R M V G K Rao, G Anand Nahar and R. Alagirusamy "Mechanical Properties of Glass Composites Base on Knitted Preforms with Inlays" Indian Journal of Fibre & Textile Research, Vol 25, June 2000, p115

Deepti Gupta , Mechanism of dyeing synthetic fibres with natural dyes, Colourage, March 2000,p23-26

Roy S C & Banerjee P K, Some preliminary investigations into the mechanics of 1x1 rib loop formation on a dial and cylinder machine, Ind. J. of Fibre & Text. Res., Vol.25, June (2000) 97-107

Banerjee P K, Sampath J P & Rao G V, Production methods & characteristics of braided PVD, Ind. J. of Fibre & Text. Res., Vol 25, Sept (2000) 182-194

Rao G V, Sampath Kumar J P & Banerjee P K, Characterization of a braided strip drain made of coir and jute yarns, Geotextile and Geomembranes, 18 (2000) 367-384

S Ghosh, Medical Textiles, The Indian Textile Journal , 2000, 110 (6), 10-14 

Ishtiaque, S.M. and D. Agrawal, The internal structure of sheath fibre in DREF-3 yarn. Journal of the Textile Institute, 2000. 91(4): p. 546-562.

Ishtiaque, S.M., M.S. Parmar, and M. Chakraborty, To study the structural behaviour of natural coloured cotton and its interaction with different chemicals. Colourage, 2000. 47(9): p. 15-16, 18-24.

Ishtiaque, S.M., Yadav, P. and Sharma, N.N. A New Approach to Improve the Performance of Spacer Fabrics for Automobiles. Man Made Textiles in India, March (2000).

Jassal, Manjeet, Aramid Fibres, Proceedings of 8th NCUTE Pilot Programm on Man Made Fibres II:Solution Spun Fibres,Editor A. K. Agrawal and M. Jassal,I.I.T. Delhi, March 2000,231 - 248. 

M.L.Gulrajani, Deepti Gupta & S.R. Maulik, Studies on dyeing with natural dyes: Part-III- Dyeing of Ratanjot dye on nylon & polyester, Indian Journal of Fibre Science and Technology, Vol.24, Dec.1999,p 294-296

M.L.Gulrajani, Deepti Gupta & S.R. Maulik, Studies on dyeing with natural dyes: Part-II- Dyeing of berberine on acrylic Fibre, Indian Journal of Fibre Science and Technology , Vol.24, Sept.1999, p223-225

M.L.Gulrajani, Deepti Gupta & S.R. Maulik, Studies on dyeing with natural dyes: Part I-Dyeing of annato on nylon & polyester, Indian Journal of Fibre Science and Technology, Vol.24, June 1999,p131- 135

Sanjay Gupta & Deepti Gupta, Green concept: Natural dyes, ATA Journal ,Oct/Nov.1999, p18-22

Sanjay Gupta & Deepti Gupta, Fusing developments in pressing & finishing, ATA Journal Apr/May 1999

Deepti Gupta, Review of light fading mechanism of dyed materials, Colourage, Oct1999, p17-20

Deepti Gupta , Fastness properties of natural dyes, Part II : Effect of chemical structure on light fastness, Colourage, August 1999,p41-46

Deepti Gupta , Fastness properties of natural dyes, Part I: Introduction & review of literature, Colourage, July1999,p35-38

Banerjee P K & Ghosh S, A model of single jersy loop formation process, J. Text. Inst. 90 (1999) 187-207

Ishtiaque, S.M. and Bhortake, M.K. An Investigation by Fractography into the Mechanism of Fibre Breakage in Rotor Spinning. J Text. Inst., 90 (1999).

Ishtiaque, S.M. Spinner’s Attraction at ITMA 99. Asian Text. J., 10 (1999).

Ishtiaque, S.M. and Atal Vijay. Optimization of Ring Frame Parameters for Coarse Preparatory. Indian J Fibre Text. Res., Dec., (1999).

M. Joshi and B.D. Thakur,International Eco Labelling of Textile Products. Colourage, April 1999, pg 19

M. Joshi, V.K Agrawal and D.K. Sharma, Meeting the stringent quality and eco parameter requirements for the textile export market: testing facilities, Chemical weekly, July 20, 1999

R.Alagirusamy “Powder Coated Braided Carbon Fibre Reinforcement for Advanced Composites” Man-Made Textiles in India, Vol XL1, No. 11, November 1998, p487

Sanjay Gupta & Deepti Gupta, Fabric Performance Testing- a Design Tool, ATA Journal , Apr/May 1998

Ishtiaque, S.M. and Swaroopa, T.K. Internal Structure and Properties of DREF-3 Yarns. Asian Text. J., 10 (1998).

Ishtiaque, S.M., Behera, B.K., Rohit and Sarkar, N. Exploratory Study on Spinnability of Bhindi Fibres. Asian Text. J., 9 (1998).

Ishtiaque, S.M., Dhavan, K., Saxena, A. and Jai Prakash. SIRO Yarn Mechanism. Text. Asia, 9 (1998).

Ishtiaque, S.M., Neckar, B. And Svehlova, L. Rotor Yarn Structure by Cross Sectional Microtomy. Text. Res. J., 11 (1998)

Ishtiaque, S.M. Configuration of Neps in Ring Spun Yarn from Man-made Fibres. Text. Res. J., 8 (1998).

Ishtiaque, S.M. Fibre Damage at Higher Rotor Speeds. Text. Res. J., 8 (1998).

Ishtiaque, S.M., Punj, S.K. and Debnath, S. Radial Packing Density of MJS Yarns. Indian J. Fibre Text. Res., 23 (1998) 229-232.

Ishtiaque, S.M. and Saxsena, A.K. Rotor Machine Variables and Yarn Structure. Part I: Influence of Machine Variables on Fibre Disorder at Rotor Groove. Indian J. Fibre Text. Res., June, 23 (1998).

Ishtiaque, S.M. and Saxsena, A.K. Rotor Machine Variables and Yarn Structure. Part II: Influence of Machine Variables on Fibre Reversal during Deposition and Peeling-off of the Fibres. Indian J. Fibre Text. Res., June, 23 (1998).

Ishtiaque, S.M. and Saxsena, A.K. Rotor Machine Variables and Yarn Structure. Part III: Fibre Distribution in Yarn in Relation to Rotor Machine Variables. Indian J. Fibre Text. Res., Sept., 23, (1998).

Ishtiaque, S.M. and Saxsena, A.K. Rotor Machine Variables and Yarn Structure. Part IV: Influence of Machine Variables on Configuration of Neps and Thick Places of Polyester Rotor Yarn. Indian J. Fibre Text. Res., Dec., 23 (1998).

Ishtiaque, S.M. and Chakraborty, M. Developments in Functional Finishes for Cotton. Colourage, 11 (1998).

Ishtiaque, S.M. Agrawal, A.K. and Dayal A. Technical Textiles: Concepts, Applications and Prospects. Colourage, 11 (1998).

Ishtiaque, S.M. and A.K. Saxena, Rotor machine variables and yarn structure: Part I - Influence of machine variables on fibre disorder at rotor groove. Indian Journal of Fibre & Textile Research, 1998. 23(2): p. 94-99.

Sanjay Gupta & Deepti Gupta., From workstation to thread, ATA Journal, Jun/Jul 1997

Sanjay Gupta & Deepti Gupta., The Final Finish, ATA Journal, Oct/Nov 1997

Banerjee P K & Balasiddhartha S K, The construction of knitted filter bag fabric, Ind. J. of Fibre & Text. Res., Vol. 22, December (1997) 305-317

Rao G V & Banerjee P K, Geosynthetics: Recent developments, Ind. J. of Fibre & Text. Res., Vol 22, December (1997) 318-336

Ishtiaque, S.M. and Kalsi, K.S. DREF-3 Canvas Yarn. Indian Text. J., 2 (1997).

Ishtiaque, S.M., Punj, S.K. and Dhingra, L.K. Influence of Spinning Condions on Structure and Properties of Polyester-Viscose Blended MJS Yarns. Indian J Fibre Text. Res., Feb., 23 (1997).

Behera, B.K., S.M. Ishtiaque, and S. Chand, Comfort properties of fabrics woven from ring-, rotor-, and friction-spun yarns. Journal of the Textile Institute, 1997. 88(3): p. 255-264.

S.J. Mahajan and B.L. Deopura, Evaluation and fibrillation behaviour of oriented polymer tapes using a tensile test method, Journal of Testing and Evaluation 25 (1997)315-321.

A. Twari, B.L. Deopura and A. Ghosh, Morphology and Structure of a liquid crystal copolyester fibres, International Plast. Engg. & Tech. 3 (1997) 73-81. 

R.Alagirusamy, Youjiang Wang and John Muzzy ‘Braided Thermoplastic Composites from Powder Coated Towpregs. Part I: Towpreg Characterization’. Polymer Composites June 1996, Vol.17, No.3, p497.

R.Alagirusamy, Youjiang Wang and John Muzzy ‘Braided Thermoplastic Composites from Powder Coated Towpregs. Part II: Braiding Characteristics of Towpreg’. Polymer Composites June 1996, Vol.17, No.3, p505.

R.Alagirusamy, Youjiang Wang and John Muzzy ‘Braided Thermoplastic Composites from Powder Coated Towpregs. Part III: Consolidation and Mechanical Properties’. Polymer Composites June 1996, Vol.17, No.17, p515.

Deepti Bahl Gupta & M.L. Gulrajani , The light fading mechanism of dyes derived from rhubarb extract, Journal of Society of Dyers and Colourists, Volume 112, Oct.1996, 269-272

V. K. Kothari and A. Das, "An Approach to the Theory of Compression of Nonwoven Fabrics". Indian Journal oof Fibre and Textile Research, 1996, 21, Page-235.

Sanjay Gupta & Deepti Gupta, Pressing , steaming, wrinkle-free, ATA Journal Oct/Nov. 1996,p 54-57

S. Mahajan, B. L. Deopura and Yimin Wang, Fibrillation behaviour of Oriented Tapes of Polyethylene and its Blends-IV, J. Appl. Polym. Sci., 60 (1996) 1551-60.

S. J. Mahajan, B. L. Deopura and Yimin Wang, The structure and Properties of Drawn Tapes of (High-density Polyethylene / Ethylene-Propylene Copolymer Blends-II, J. Appl. Polym. Sci., 60 (1996) 1527-38

S. J. Mahajan, B. L. Deopura and Yimin Wang, The Structure and Properties of Drawn Tapes of (High Density Polyethylene/Ethylene copolymer) Blends- I, J. Appl. Polym. Sci., 60 (1996) 1517-20.

Jassal, M. Kinetics and mechanisms of alkali-catalyzed reaction of 2-methylresorcinol with formaldehyde in different media. Chemical Papers (1995), 49(2), 85-90. 

Click here for additional information

Ishtiaque, S.M. and Bhortake, M.K. Influence of Fibre and Machine Parameters on Fibre Damage and Reversal in Rotor Spinning. Asian Text. J., 7 (1995)

Ishtiaque, S.M. and Bhortake, M.K. Study of Fibre Damage in Different Layers of Feed Sliver in Rotor Spinning. Asian Text. J., 3 (1995).

Ishtiaque, S.M. and Singh, C.P. Influence of Processing Parameters on Rotor Spun Acrylic Yarn Characteristics. Indian J Fibre Text. Res., 20 (1995).

Ishtiaque, S.M. and Sharma, N. Effect of Opening Roller and Rotor Speeds on Fibre Disorder at Rotor Groove. Indian J Fibre Text. Res., March, 20 (1995).

Malhotra, H. C.; Jassal, P. S.; Jassal, M. Kinetics and mechanisms of alkali-catalyzed reaction of 2-methylresorcinol with formaldehyde in different media. Chemical Papers (1995), 49(2), 85-90. 

S. Mehta and B. L. Deopura, Fibres from Blends of PBT and Thermotrophic Liquid Crystalline Copolyester, Acta Polymerica, 46 (1995) 178-182.

S Mehta and B. L. Deopura, Morphological and Mechanical Properties of PET/ LCP Blended Fibres, J. Appl., Polym. Sci., 56 (1995) 169-175.

V. K. Kothari and A. Das, Effect of Dynamic Loading on Compressional Behaviour of Spunbonded Nonwoven Fabrics, Geotextile and Geomembranes, 1994, 13, Page-55

Deepti Bahl Gupta & M.L. Gulrajani , Kinetic & thermodynamic studies on 2-Hydroxy, 1,4-naphthoquinone (lawsone), Journal of Society of Dyers and Colourists, Volume 110, March 1994, p112-115 

Jassal, M.; Energetics of the acid-catalyzed 2-methylresorcinol-formaldehyde reaction

Click here for additional information

V. K. Kothari and A. Das, "Time Dependent Behaviour of Compressional Properties of Nonwoven Fabrics." Indian Journal of Fibre and Textile Research, 1994, 19, Page-58

V. K. Kothari and A. Das, "Studies on Compressional Behaviour of Nonwoven Fabrics, Part-II : Effect of Rate of Repeated Compression - Recovery Cycles and Pressure Foot Area on Compressional Behaviour". Indian Journal of Fibre And Textile Research, 1994, 19, Page-17 

Deepti Gupta & Bhawana Goswami, Processing technology for cotton garments- a Review, Clothesline, February 1994,p85-90

M.Joshi, S.N. Maiti and A.Misra, Influence of fibre length, fibre orientation and interfacial adhesion on the mechanical properties of short glass fibre reinforced PBT/polyolefin alloys. Polymer Composites, 15(5), 349 (1994). 

B. D. Thakur, M. Joshi, M. Chakraborty and S. Pathak,Zero Discharge - A Futuristic Trend in Textile Process House by TDS control. American Dyestuff Reporter, 83(8), 32 (1994). Now published as AATCC Review, USA 

Ishtiaque, S.M., Chanchal and Roopvibhushith. Effect of Fibre, Yarn and Fabric Properties on Pilling. Indian Text. J., July (1994).

Ishtiaque, S.M. and Kumar, P. Impact of Rotor and Opening Roller Speeds on Configuration of Fibres in Yarn. Indian J Fibre Text. Res., June (1994).

Ishtiaque, S.M. and A. Vijay, Optimization of ring frame parameters for coarser preparatory. Indian Journal of Fibre & Textile Research, 1994. 19(4): p. 239-46.

V. K. Kothari and A. Das, Compressional Behvaiour of Spunbonded Nonwoven Fabrics, Journal of the Textile Institute, 1993, 84, No. 1, Page-16

V. K. Kothari and A. Das, Compressional Behvaiour of Spunbonded Nonwoven Fabrics, Journal of the Textile Institute, 1993, 84, No. 1, Page-16

V. K. Kothari and A. Das, "Studies on Compressional Behaviour of Nonwoven Fabrics, Part-I: Development of a Constant Rate of Deformation (CRD) Tester and its Comparison with Essdiel Thickness Tester". Indian Journal of Fibre and Textile Research, 1993, 18, Page – 175 

Deepti Bahl Gupta & M. L. Gulrajani, Studies on dyeing with natural dye Juglone ( 5-Hydroxy-1,4-naphthoquinone), Indian Journal of Fibre Science and Technology, Vol.18, December 1993, p 202-206

M.L. Gulrajani, Deepti B. Gupta, Anita Kumari & Manoj Jain, Dyeing with Red Natural Dyes, Indian Textile Journal, May (1993) p90

Ishtiaque, S.M. Influence of Man-made Fibres on Configuration of Neps. Asian Text. J., 11 (1993).

Ishtiaque, S.M. and Khane, S.K. Study of Internal Structure of Ring, Rptor and Air-jet Spun Blended Yarn by Cross sectional View. Text. Asia, 11 (1993).

Ishtiaque, S.M., Murthy, H.V.S. and Talukdar, M.M. Effect of Fibre and Finish on Uster Classimat Faults and Other Yarn Properties. Indian J Fibre Text. Res., Dec., (1993).

Ishtiaque, S.M., Sharma, I.C. and Sharma, S. Structural Mechanics of SIRO Yarn by Microtomy. Indian J Fibre Text. Res., Sept., (1993).

S. Mehta and B. L. Deopura Studies on Fibre Formation of Thermotropic Copolyesters, J. Appl. Polym, Sci., 47 (1993) 857-866

V. K. Kothari and A. Das, Compressional Behaviour of Nonwoven Geotextiles, Geotextiles and Geomembranes, 1992, 11, Page - 235.

Jassal, M.; Studies of the effect of comonomers on the microstructure of polyacrylonitrile in radical polymerization using NMR spectroscopy. International Journal of Polymeric Materials (1992), 18(1-2), 105-15. 

Click here for additional information

M.L. Gulrajani, Deepti B. Gupta, Varsha Aggarwal & Manoj Jain, Some Studies on Natural Yellow Dyes, Part – V: Harshingar, Safflower and Barberry, Indian Textile Journal, 102 (11) August (1992) p86

M.L. Gulrajani, Deepti B. Gupta, Varsha Aggarwal & Manoj Jain, Some Studies on Natural Yellow Dyes, Part IV: Tannins: Terminalia Chebula and Punica Granatum, Indian Textile Journal, July (1992) p78-83

M.L. Gulrajani, Deepti B. Gupta, Varsha Aggarwal & Manoj Jain, Some Studies on Natural Yellow Dyes, Part III: Quinones: Henna, Dolu, Indian Textile Journal, March (1992) p76

M.L. Gulrajani, Deepti B. Gupta, Varsha Aggarwal & Manoj Jain, Some Studies on Natural Yellow Dyes : Part II : Flavonoids – Kapila/Onion/Tesu, Indian Textile Journal, Feb. (1992) 78

M.L. Gulrajani, Deepti B. Gupta, Varsha Aggarwal & Manoj Jain, Some Studies on Natural Yellow Dyes : Part I: CI Natural Yellow 3 : Turmeric, Indian Textile Journal, Jan. (1992) 50

M.Joshi S.N.Maiti and A. Misra,Polybutylene terephthlate (PBT)/polyolefin alloys. II Mechanical properties and rheology, J.App. Polym. Sci., 45, 1837 (1992). 

Ishtiaque, S.M. Spinning of Synthetic Fibres. Indian J Fibre Text. Res., Dec., (1992).

Prasad, J. V.; Satpathy, U. S.; Jassal, M.; Pantar, A.; Satish, S. Studies of the effect of comonomers on the microstructure of polyacrylonitrile in radical polymerization using NMR spectroscopy. International Journal of Polymeric Materials (1992), 18(1-2), 105-15. 

A. K. Gupta, S. K. Rana and B. L. Deopura, 

K. N. Bhaumik, B. L. Deopura & V. K. Srivastava, Technical Grade Filaments from Polymer Blends of Nylon6 and Nylon66, Intern. J. Polymeric Mater.,18 (1992) 71-86.

A. Chaudhari and A. Das, Characteristics of Jute Blended Yarn, Indian Textile Journal, 1991 

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part VII, Manmade Textiles In India, 1991; 34(1): 5-8. 

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part VIII, Manmade Textiles In India, 1991; 34(5): 172-179.

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter For Controlling Air Pollution –Part IX, Manmade Textiles In India, 1991; 34(6): 212-235. 

Banerjee P K, A study on single jersy loop formation system: Part-I, Wirkerei-und Srickerei Technik 41 (1991) 10, 1155-57

Banerjee P K, A study on single jersy loop formation system: Part-II , Wirkerei-und Srickerei Technik 41 (1991) 11, 1263-1265

M.Joshi, S. N. Maiti and A. Misra, Polybutylene terephathalate (PET) /polyolefin alloys. I. Morphological studies, J.App. Polym. Sci., 43, 311(1991). 

Ishtiaque, S.M. and Saxena, A.K. Configuration of Thick Places in Rotor Spun Polyester Yarn. Indian J Fibre Text. Res., Dec., (1991).

Ishtiaque, S.M. and Saxena, A.K. Effect of Sliver Preparation on Fibre Disorder at Rotor Groove. Indian J Fibre Text. Res., Sept., (1991).

Ishtiaque, S.M. and Behera, B.K. Exploration Studies on Comparison of Acrylic based Yarn Manufacture in Different Spinning Systems. Synthetic Fibres, April/June, No. 2, 20 (1991).

B. L. Deopura, S. Mahajan & K. N. Bhaumik. Fibres and Films from Polymeric Blends, Indian J. Fib. Tex. Res., 18 (1991) 30-42.

S. J. Mahajan, K. Bhaumik & B. L. Deopura, Fibres Span from Blends of Different Molecular Weights of PP, J. AppI. Polym. Sci., 43 (1991) 49-56.

B. L. Deopura, K. N. Bhaumik & S. Mahajan, Fibres from Polymer Blends, India J. Fib. Text. Res., 16 (1991) 65-72.

Sanjay Mehta & B. L. Deopura, Thermal prop. of blends of PET & a Liquid Crystalline Copolyester, Polymer Bull., 26 (1991) 571-578

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter For Controlling Air Pollution –Part I, Manmade Textiles In India, 1990; 33(4): 125-129

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution – Part- II, Manmade Textiles In India, 1990; 33(5): 165-167. 

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part III, Manmade Textiles In India, 1990; 33(6): 206-209. 

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part IV, Manmade Textiles In India, 1990; 33(8): 276-279.

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part V, Manmade Textiles In India, 1990; 33(9): 319-324.

A. Das, K. N. Chatterjee, G. K. Tyagi, S.C. Jhalani, B. P. Mani and S Babu, Polyester Needle-Punched Nonwoven Dust Filter for Controlling Air Pollution –Part VI, Manmade Textiles In India, 1990; 33(10): 358-361.

Banerjee P K & Ghosh S, Mechanics of single jersy weft knitting process, Text.Res.J. April (1990) 203-211

Ishtiaque, S.M. and Chattopadhyay, S. The Effects of Fibre Length on Behaviour of Rotor and Ring Spun Yarns. Text. Asia, 4 (1990).

R.S. Haldar, M. Joshi and A. Misra, Morphological studies on the blends of poly (butylene terephtalate) and Bisphenol-A polycarbonate. J. App. Polym. Sci., 39, 1251(1990) 

Ishtiaque, S.M. A Study of Preparatory Cleaning on Rotor Spun Yarn Properties. Indian J Fibre Text. Res., March (1990).

S. P. Mishra & B. L. Deopura, Modification of PET Fibre by Blending with PBT Fibre : Part VI - Annealing Behaviour, 15 (1990) 100- 103.

S. P. Mishra & B. L. Deopura, Modification of PET Fibre by Blending with PBT fibre : Part V - Extrusion behaviour. 15 (1990) 100-103.

A.K.Sengupta, V.K.Kothari and R.Alagirusamy ‘Characterization of the Structural Integrity of Air-Jet Textured Yarns’. Textile Research Journal, Vol.59, No.2, December 1989, p758.

A.K.Sengupta, V.K.Kothari and R.Alagirusamy "Influence of Drawing Variables on the Properties of Air Textured Yarns made from POY Polyester Feeder Yarns" Chemifasern/Textilindustrie 39/91, 6 (1989) E84-88 and 731-735.

A.K.Sengupta, V.K.Kothari and R.Alagirusamy "Influence of Drawing Variables on the Properties of Air Textured Yarns made from POY Polyester Feeder Yarns" Man Made Fibre Year Book of CTI (1989) p80-83.

Ishtiaque, S.M., Longitudinal Fiber Distribution in Relation to Rotor Spun Yarn Properties. Textile Research Journal, 1989. 59(11): p. 696-699.

S. P. Mishra & B. L. Deopura, Modification of PET Fibre by Blending with PBT fibre: Part IV - deformation behaviour, Indian J. Tex. Res., 14 (1989) 59-62.

R. S. Haldhar, A. Mishra and B. L. Deopura, Chemistry of the Ternary Blends of Polyethylene Terphthalate, Bisphene-A-polycarbonate and Polypropylene, Poly. Engg. Sci., 29 (1989) 359.

A.K.Sengupta, V.K.Kothari and R.Alagirusamy "An analysis of the Air-Jet Yarn-Texturing Process’. Letter to the editor, Journal of the Textile Institute, Vol.79, No.3, 1988, p520.

Banerjee P K & Alaiban T S, Geometry and dimensional properties of plain loops made of rotor spun cotton yarns, Text.Res.J. March(1988) 123-128

Banerjee P K & Alaiban T S, Area and linear properties of plain loops made of rotor spun cotton yarns, Text.Res.J. April (1988) 214-221

Banerjee P K & Alaiban T S, Area and linear properties of plain loops made of rotor spun cotton yarns, Text.res.J. April (1988) 214-221

Banerjee P K & Alaiban T S, Spirality of wale lines in plain loops made of rotor spun cotton yarns, Text.Res.J. May (1988) 288-290

Banerjee P K & Alaiban T S, Spirality of wale lines in plain loops made of rotor spun cotton yarns, Text.Res.J. May (1988) 288-290

Banerjee P K & Alaiban T S, The shape of a plain loop made of rotor spun cotton yarn, Text.Res.J. June (1988) 365-369

Banerjee P K & Alaiban T S, The length of a plain loop made of rotor spun cotton yarn, Text.Res.J. July (1988) 422-425

Deepti Bahl & KC Gupta, Development of dyeing process of silk with natural dye-cutch, Colourage, Nov.16-30,1988, p22-24

Ishtiaque, S.M. and Sharma, N. Fibre Disorder in Rotor Spinning. Text. Asia, 11 (1988).

Ishtiaque, S.M., Fiber Damage at Higher Rotor Speeds. Textile Research Journal, 1988. 58(3): p. 179-180.

Ishtiaque, S.M. and A.K. Saxena, Configuration of Neps in Rotor Spun Yarn from Polyester Fibers. Textile Research Journal, 1988. 58(11): p. 678-679.

Neckar, B., S.M. Ishtiaque, and L. Svehlova, Rotor Yarn Structure by Cross-Sectional Microtomy. Textile Research Journal, 1988. 58(11): p. 625-632.

R. S. Haldhar, A. Mishra and B. L. Deopura, Studies on the blends of poly(ethylene terphthaIate) with bisphenol polycarbonate and polypropylene Polym. Engg. Sci., J. Appl. Polym. Sci., 37 (1988) 230-37.

R. S. Haldhar, A. Mishra and B. L. Deopura, Studies on the blends of poly(ethylene terphthaIate) with bisphenol polycarbonate and polypropylene Polym. Engg. Sci., J. Appl. Polym. Sci., 37 (1988) 230-37.

S. P. Mishra, B. L. Deopura and C. S. Vishwanath, Modification of PET fibre by Melt-blending with PBT. Part-III Simultaneous Melt Blending and Spinning, Indian J. Tex. Res., 13 (1988) 23-25.

C. S. Vishwanath, B. L. Deopura and S. P. Mishra, Modification of PET Fibre by Melt Blending with PBT. Part II, Sequential Melt Blending and Spinning, Indian J. Tex. Res. 13 (1988) 23-25.

Banerjee P K & Alaiban T S, Relationship between count, gauge and tightness factor in single jersy knitting, Text.Res.J. Sept (1987) 513-518

Banerjee P K & Alaiban T S, Analysis of limiting conditions in single jersy knitting, Text.Res.J. Oct. (1987) 568-574

Bajaj, P.; Chavan, R. B.; Manjeet, B. Structural investigations of saponified products of acrylonitrile terpolymer by PMR and CMR spectroscopy,Eur. Poly. J.,23(1) 89 (1987).

Manjeet, B Application of synthetic thickeners for reactive printing,ACTI,1987

Bajaj, P.; Chavan, R. B.; Manjeet, B..Application of synthetic thickeners for printing,colourage,June 15(1987)

B. L. Deopura & K. N. Bhaumik, Effect of Moisture Content on Uniformity of Nylon filaments- Synthetic fibres, 16 (1987) 23-24.

S. P. Mishra & B. L. Deopura, Fibres from PET & PBT Blends, J. Appl. Polym. Sci., 33 (1987), 759-768.

S. P. Mishra and B. L. Deopura, Fibres from Poly (ethylene terephthalate) and Poly (butyIene terephthalate) Blends: Mechanical behaviour, J. Appl. Polym. Sci., 33 (1987) 759-768. 

B. L. Deopura and K. N. Bhaumik, Effect of Moisture Content on Uniformity of Nylon Filament, Synthetic Fibre, 16 (1987) 23-24.

Ishtiaque, S.M. and Neckar, B. New Method to Study the Area of Fibres in Yarn Cross Section. Indian J Text. Res., March (1986).

Ishtiaque, S.M. Distribution of Fibres in Cross Section of Rotor- and Ring-Spun Yarns and their Strength. Indian J Text. Res., Dec., (1986).

Manjeet, B. Bajaj, P.; Chavan, R. B.; Crosslinked acrylate thickeners/preparation and performance in reactive printing, Textile Research J.,Jan.,63(1986)

Bajaj, P.; Chavan, R. B.; Manjeet, B. Acrylic based thickeners for partial replacement of kerosene in pigment printing,colourage,Aug.21,27 (1986).

Bajaj, P.; Chavan, R. B.; Manjeet, B. Thermal studies on the saponification products of acrylonitrile terpolymer Journal of Macromolecular Science, Chemistry (1986), A23(3), 335-47

S. P. Mishra and B. L. Deopura, Modification of PET fibre by polymer blending with PBT : Part I. Literature Review and Theoretical Predictions of Compatibility, Indian J. Tex., Res., 11 (1986) 177-180.

B. L. Deopura, S. Kadam, A Study of Blends of Different Molecular Weight of Polypropylene, J. Appl. Polym. Sci., 31 (1986) 2145-2155.

Anu Verma, B. L. Deopura and A. K. Sengupta, A Study on blends of Nylon6 and Nylon66, J. Appl. Polym. Sci., 31 (1986) 747-762.

Grover, J.M. and S.M. Ishtiaque, Configuration of Neps in Ring Spun Yarns from Manmade Fibers. Textile Research Journal, 1985. 55(2): p. 138-138.

Chavan, R. B.; Advani, S.; Sridhar, A.; Manjeet. Acrylic based thickeners for printing of disperse and disperse/reactive combinations .Colourage (1985), 32(24), 21-5

Bajaj, Pushpa; Chavan, R. B.; Manjeet. Saponification kinetics of acrylonitrile terpolymer and polyacrylonitrile. Journal of Macromolecular Science, Chemistry (1985), A22(9), 1219-39

Bajaj, Pushpa; Chavan, R. B.; Manjeet. Reactive dye-Acrylic Thickeners interactions, Am.Dyestuff Rept.,Nov. 37 (1985) 

S. P. Mishra and B. L. Deopura, Crystallization behaviour of Polyethylene terephthalate) and Poly (butylene terephthalate) Blends, Makromol Chemie, 186 (1985) 641-647.

S. P. Mishra and B. L. Deopura, Theoretical Prediction of Compatibility of Poly (ethylene terephthalate) and Poly(butylene terephthalate) blends, Poly. Comm, 26 (1985) 5-7.

Banerjee P K ,Experimental investigations of yarn feeding on warp knitting machines with length controlled warp delivery systems, Wirkerei-und Srickerei Technik 34 (1984) 4, 307-310

Banerjee P K, Analytical investigation and designing of controller of length controlled yarn feeding systems on warp knitting machines, Wirkerei-und Srickerei Technik 34 (1984) 9,856-862

Banerjee P K, Stabilization and stable form of loop in single jersy fabrics, Wirkerei-und Srickerei Technik 34(1984) 10,1173-76

Banerjee P K, Analytical investigation and designing of controller of length controlled yarn feeding systems on warp knitting machines, Wirkerei-und Srickerei Technik 34 (1984) 9,856-862

Banerjee P K, Stabilization and stable form of loop in single jersy fabrics, Wirkerei und-Srickerei Technik 34(1984) 10,1173-76

Bajaj, Pushpa; Chavan, R. B.; Manjeet. Synthetic thickeners for reactive printing,Am. Dyestuff reptr.,Sept.,38(1984)

Bajaj, P.; Chavan, R. B.; Manjeet, B. A critique of literature on thickeners in textile printing. Journal of Macromolecular Science, Reviews in Macromolecular Chemistry and Physics (1984), C24(3), 387-417. 

Anu Verma, B. L. Deopura and A. K. Sengupta, Effect of Moisture Content on Stress Ageing of Nylon6 Text. Res. J, 54 (1984) 92-97.

B. L. Deopura and S. P. Mishra, Prediction of Viscosity for Blends of Nylon6 with different Molecular Weight Components, Indian J. Tex. Res. 9 (1984) 28-29.

A. Mishra, B. L. Deopura, S. F. Xavier, F. D. Harteley and R• H. Peters, Transcrystallinity in Injection Molded Polypropylene Glass Fibre Composites, Die Ange. Makromol Chemie, 113 (1983) 113-120.

B. L. Deopura, Anu Verma and A. K. Sengupta, Improved Nylon6 Filaments by Stress Ageing and Blending, Man-Made Tex. India, 11 (1983) 539.

B. L. Deopura A. K. Sengupta and Anu Vama, Effect of Moisture on Nylon, Polym. Commun., 24 (1983) 287

Z. Florjanczyk, B. L. Deopura, O. Vogl. and R. S. Stein, Polyterephthalates of 2, 3-Disubstituted Butanediols 1, 4 : Effect of aliphatic substituents on Tg and Tm of the Polyesters J. Polym. Sci., Chem. Ed., 20 (1982)1051-1063.

S. P. Mishra and B. L. Deopura, Tie chains and Module of Nylon 6 Fibres, J. Appl. Polym. Sci., 27 (1982) 3211-3218.

R. N. Goel, A Hepworth, B. L. Deopura, I. K. Verma and D. S. Verma Polyimide fibres: Structure and Morphology, J. Appl. Polymer, Sci., 23 (1979) 3541-49.

R. Raman, B. L. Deopura, D. S. Verma and V. D. Gupta, Temperature dependent Small-angle X-ray Scattering from Polyethylene, Polymer J., 9 (1977) 115-120.

R Raman, B. L. Deopura, D. S. Verma and V. D. Gupta, Vibrational Spectra of Polyamides in relation to Polyethylene, Indian J. Tex. Res., 2 (1977) 56-58.

B. L. Deopura, T. B. Sinha and Vijay Kumar, Melting behaviour and Crystalline Intermediate and Amorphous Phases in Poly(ethylene terphthalate) fibre, Polymer Commu, 18 (1977) 856-857.

5. B. L. Deopura, T. B. Sinha and D. S. Verma, Dependence of Mechanical Properties on Crystalline, Intermediate and Amorphous Phases in Poly (ethyIene terphthalate) fibre, Textile Res. J., 48 (1977) 267-268.

V. D. Gupta and B. L. Deopura, Small-angle X-ray Scattering from Polyethylene before and after Irradiation, Indian J. Pure and Appl. Phys, 10 (1972) 657-662.

B. L. Deopura and V. D. Gupta, Small-angle X-ray Scattering from Polyethylene, Chem. Phys. Letts., 9 (1971) 4013-2.

B. L. Deopura and V. D. Gupta, Vibrational Spectra of Triamino-trinitrobenzene, J. Chem. Phys., 54 (1971) 4013-20.

V. D. Gupta and B. L. Deopura, Low-frequency Neutron Spectra of Trinitro-triaminobenzene, MoI, Phy., 19 (1970) 589-592

Synthesis, characterization, and rheological studies of methacrylic acid-ethyl acrylate-diallyl phthalate copolymers., India. Journal of Applied Polymer Science (2003), 89(5), 1430-1441 

Click here for additional information